Research activities
[Publications]
Selective growth of graphene in layer-by-layer via chemical vapor deposition, Nanoscale 8 (2016) Characterization of Graphene based FET Fabricated using a Shadow Mask, Scientific Reports 6 (2016) Flexible polymer dispersed liquid crystal film with graphene transparent electrodes , Current Applied Physics 16 (2016) Study of Graphene-based 2D-Heterostructure Device Fabricated by All-Dry Transfer Process, ACS APPLIED MATERIALS INTERFACES 8 (2016) Understanding the relationship between microstructure and mechanical properties of Al-Cu-Si ultrafine eutectic composites, Engineering Materials And Design 92 (2016) Study of Graphene-based 2D-Heterostructure Device Fabricated by All-Dry Transfer Process, ACS APPLIED MATERIALS INTERFACES 8 (2016) Characterisation of carbon nanotube pastes for field emission using their sheet resistances, Applied Surface Science 353 (2015) Simple and Precise Quantification of Iron Catalyst Content in Carbon Nanotubes Using UV/Visible Spectroscopy, CHEMISTRYOPEN 4 (2015) Enhancement of mechanical properties in a Fe81Nb9B10 ultrafine-eutectic composite with in-situ polygonal pro-eutectic and encapsulating eutectic structure, Journal Of Alloys And Compounds 643 (2015) Improving the plasticity and strength of Fe-Nb-B ultrafine eutectic composite, Materials And Design 76 (2015) Designing porous metallic glass compact enclosed with surface iron oxides, Journal Of Alloys And Compounds 635 (2015) Effect of Annealing in Ar/H-2 Environment on Chemical Vapor Deposition-Grown Graphene Transferred With Poly (Methyl Methacrylate), IEEE TRANSACTIONS ON NANOTECHNOLOGY 14 (2015) Electrochromic Device Containing Heptyl Viologen, PEDOT, TiO2 and TEMPO, JOURNAL OF THE ELECTROCHEMICAL SOCIETY 161 (2014) Mechanically Stable Tuning Fork Sensor With High Quality Factor for the Atomic Force Microscope, SCANNING 36 (2014) Degradation pattern prediction of a polymer electrolyte membrane fuel cell stack with series reliability structure via durability data of single cells, APPLIED ENERGY 131 (2014) Micro-to-nano-scale deformation mechanisms of a bimodal ultrafine eutectic composite, SCIENTIFIC REPORTS 4 (2014) New metric for evaluating the purity of single-walled carbon nanotubes using ultraviolet–visible-near infrared absorption spectroscopy, Carbon 75 (2014) Post-mortem analysis of a long-term tested proton exchange membrane fuel cell stack under low cathode humidification conditions, JOURNAL OF POWER SOURCES 253 (2014) PdO-doped BaZr0.8Y0.2O3-delta electrolyte for intermediate-temperature protonic ceramic fuel cells, ACTA MATERIALIA 66 (2014) Highly conductive barium zirconate-based carbonate composite electrolytes for intermediate temperature-protonic ceramic fuel cells, JOURNAL OF ALLOYS AND COMPOUNDS 585 (2014) Visible cathodoluminescence of quantum dot films by direct irradiation of electron beam and its materialization as a field emission device, Optics Express 21 (2013) Various synthesis methods of aliovalent-doped ceria and their electrical properties for intermediate temperature solid oxide electrolytes, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY 38 (2013) Addition effects of erbia-stabilized bismuth oxide on ceria-based carbonate composite electrolytes for intermediate temperature solid oxide fuel cells, International Journal Of Hydrogen Energy 37 (2012) High-current field emission of point-type carbon nanotube emitters on Ni-coated metal wires, CARBON 50 (2012) High-speed atomic force microscopy with phase-detection, CURRENT APPLIED PHYSICS 12 (2012) Field emission characteristics of carbon nanotube films fabricated on a metal mesh by filtration, JOURNAL OF ALLOYS AND COMPOUNDS 521 (2012) Reduced damage to carbon nanotubes during ultrasound-assisted dispersion as a result of supercritical-fluid treatment, CARBON 50 (2012) The stress-dependent piezoelectric coefficient of ZnO wire measured by piezoresponse force microscopy, SCRIPTA MATERIALIA 66 (2012) Spectroscopic Studies and Electrical Properties of Transparent Conductive Films Fabricated by Using Surfactant-Stabilized Single-Walled Carbon Nanotube Suspensions, Carbon 49-13 (2011) Viscosity Dependence of Electrochemical Etching for Gold Tip Fabrication, Current Applied Physics 11-6 (2011) Ridge Formation and Removal Via Annealing in Exfoliated Graphene, Journal of Nanoscience and Nanotechnology 11-7(SI) (2011) Heterogeneous Eutectic Structure in Ti-Fe-Sn Alloys, Intermetallics 19-4 (2011) Effect of Cutting and Functionalization of Single-Walled Carbon Nanotubes on Their Dispersion Behaviors, Journal of Nanoscience and Nanotechnology 11 (2011) Growth of Few-Layer Graphene on a Thin Cobalt Film on a Si/SiO(2) Substrate , Chemical Vapor Deposition 17(1-3) (2011) Application of Scanning Probe Lithography to Graphite Patterning, Journal of Nanoscience and Nanotechnology 11-2 (2011) Effect of Si on microstructure and mechanical properties of Fe-based ultrafine eutectic composites, Intermetallics 18 (2010) Light radiation through a transparent cathode plate with single-walled carbon nanotube field emitters, Applied Surface Science 256 (2010) Effect of Nb on microstructure and mechanical properties of ultrafine eutectic Fe-Ni-B-Si composites, Journal of Alloys and Compounds 504S (2010) Effect of poly(2-ethyl-2-oxazoline) as a surface modifier for multi-walled carbon nanotubes in poly(vinyl alcohol) composite, Polymers and Polymer Composites 18(5) (2010) Effect of micro and nanoparticle inorganic fillers on the field emission characteristics of photosensitive carbon nanotube pastes, Applied Surface Science 256 (2010) Lateral force microscopy in low normal force limit, Current Applied Physics 10 (2010) Carbon nanotube pillar structures for human neural cell culture, Journal of Vacuum Science and Technology B 27-6 (2009) The production of transparent carbon nanotube field emitters using inkjet printing, Physica E 41-8 (2009) Comparison of frictional forces on graphene and graphite, Nanotechnology 20-32 (2009) Mechanical properties of large-scale Mg-Cu-Zn ultrafine eutectic composites, Journal of Alloys and Compounds 481-1-2 (2009) Magnetization anisotropy of Ni dots with several tens of nanometer diameter, Solid State Communications 149, 21-22 (2009) Influence of length distributions of carbon nanotubes on their field emission uniformity in the paste-printed dot arrays, Diamond and Related Materials 17 (2008) Optical and field emission properties of single-crystalline aligned ZnO nanorods grown on a aluminium substrate, Journal of Physics D: Applied Physics 41 (2008) Purification of single-walled carbon nanotubes using a fixed bed reactor packed with zirconia beads, Carbon 46 (2008) Frictional force detection from lateral force microscopic image a Si grating, Colloids and Surfaces A: Physicochem. Eng. Aspects 313-314 (2008) Characteristics of carbon nanotubes grown by mesh-inserted plasma-enhanced chemical vapor deposition, Carbon 45 (2007) A Study of Hydroxyapatite Coating on Porous Ti Compact by Electrostatic Spray Deposition, Solid State Phenomena 124 (2007) Surface Modification and Heat Treatment of Ti Rod by Electro Discharge, Solid State Phenomena 124 (2007) Self-assembled microporous Ti-6Al-4V implant compacts induced by electro-discharge-sintering, Scripta Materialia 56 (2007) Self-assembled bulk metallic glass composite prepared by electro discharge bonding technique, Materials Science and Engineering A 447 (2007) Wear Behavior of Functionalized Multi-walled Carbon Nanotube Reinforced Epoxy Matrix Composites, Journal of Composite Materials 40-21 (2006) Field emission from carbon nanotube emitters fabricated by the metal intermediation layer”, Journal of Applied Physics 100, 64308 (2006) Sept. 2006., Journal of Applied Physics 100 (2006) Fabrication of patterned catalyst films for carbon nanotube by selective electroless deposition, Carbon 44-9 (2006) Optimization of electron beam focusing for gated carbon nanotube field emitter arrays, IEEE Transactions on Electron Devices 52-12 (2005) Low temperature crystallization of high permittivity Ta oxide using an Nb oxide thin film for metal/insulator/metal capacitors in dynamic random access memory applications, Journal of Vacuum Science and Technology B 23-1 (2005)