연구활동 Research activities

논문
  • [국외]
  • Enhancement of photocatalytic performance in degradation of aqueous trichloroethylene and methylene blue by using TiO2 thin film fabricated by cellulose nanocrystals templating and Nb doping, WOOD SCIENCE AND TECHNOLOGY 57 (2023)
  • Effects of hydrothermal treatment of cellulose nanocrystal templated TiO2 films on their photodegradation activity of methylene blue, methyl orange, and rhodamine B, CERAMICS INTERNATIONAL 49 (2023)
  • Detailed microstructural and mechanical evaluation of yttria-stabilized zirconia-Ti composite compacts developed using spark plasma and electric discharge sintering processes, CERAMICS INTERNATIONAL 48 (2022)
  • Transition metal-doped mesoporous TiO2 films fabricated through cellulose nanocrystal template synthesis: studies of physicochemical, spectrophotometric properties, and photocatalytic degradation activity, CELLULOSE 29 (2022)
  • Synthesis of TiC reinforced Ti matrix composites by spark plasma sintering and electric discharge sintering: A comparative assessment of microstructural and mechanical properties, CERAMICS INTERNATIONAL 45 (2019)
  • Rapid self-sustaining consolidation of titanium silicide (Ti5Si3) via transient liquid phase reaction induced by an electric discharge, INTERNATIONAL JOURNAL OF REFRACTORY METALS HARD MATERIALS 80 (2019)
  • Carbide formation in electric-discharge-sintered Ti3Al compact caused by steric acid in ball-milled Ti and Al powder mixture, CERAMICS INTERNATIONAL 44 (2018)
  • Mesoporous titania films templated by cellulose nanocrystals: morphological and spectrophotometric properties, CELLULOSE 25 (2018)
  • Photocatalytic performance of highly transparent and mesoporous molybdenum-doped titania films fabricated by templating cellulose nanocrystals, CERAMICS INTERNATIONAL 44 (2018)
  • SURFACE MODIFICATION OF SELF-CONSOLIDATED MICROPOROUS Ti IMPLANT COMPACTS FABRICATED BY ELECTRO-DISCHARGE-SINTERING IN AIR, ARCHIVES OF METALLURGY AND MATERIALS 62 (2017)
  • SELF-CONSOLIDATION MECHANISM OF Ti5Si3 COMPACT OBTAINED BY ELECTRO-DISCHARGE-SINTERING DIRECTLY FROM PHYSICALLY BLENDED Ti-37.5 AT.% Si POWDER MIXTURE, Archives Of Metallurgy And Materials 62. 2 (2017)
  • SPONTANEOUS FORMATION OF TITANIUM NITRIDE ON THE SURFACE OF A Ti ROD INDUCED BY ELECTRO-DISCHARGE-HEAT-TREATMENT IN AN N-2 ATMOSPHERE, Archives Of Metallurgy And Materials 62 (2017)
  • SELF-CONSOLIDATION AND SURFACE MODIFICATION OF MECHANICAL ALLOYED Ti-25.0 AT.% Al POWDER MIXTURE BY USING AN ELECTRO-DISCHARGE TECHNIQUE, Archives Of Metallurgy And Materials 62. 2 (2017)
  • Rapid recrystallization and surface modification of titanium by electro discharge , Surface Engineering 31 (2015)
  • Electrical discharge process for rapid oxycarburisation of titanium in air, Materials Science And Technology 31 (2015)
  • Microporous Ti Implant Compact Coated with Hydroxyapatite Produced by Electro-Discharge-Sintering and Electrostatic-Spray-Deposition, Journal Of Nanoscience And Nanotechnology 14 (2014)
  • Characterization and deformation behavior of Ti hybrid compacts with solid-to-porous gradient structure, Materials And Design 60 (2014)
  • Plastic deformation behavior of Fe-Co-B-Si-Nb-Cr bulk metallic glasses under nanoindentation, Journal Of Alloys And Compounds 587 (2014)
  • Formation of porous metallic glass compacts by electro-discharge sintering, Journal of Alloys and Compunds 509-1 (2011)
  • Decomposition of icosahedral phase in Ti52Zr28Ni20 powder during electro-discharge sintering , Journal of Alloys and Compounds 504 (2010)
  • Fabrication of porous Ti- and W- compacts by electro-discharge-sintering process, Surface Review and Letters 17(2) (2010)
  • Microstructural evolution and mechanical properties of Mg-Cu-Zn ultrarine eutectic composites, J. of Materials Research 24-9 (2009)
  • Sn effect on microstructure and mechanical properties of ultrafine eutectic Ti-Fe-Sn alloys, J. of Alloys and Compounds 483(1-2) (2009)
  • Mechanical properties of large-scale Mg-Cu-Zn ultrafine eutectic composites, J. of Alloys and Compounds 481(1-2) (2009)
  • DEVELOPMENT OF HIGH STRENGTH Mg-Cu-Zn ULTRAFINE EUTECTIC COMPOSITES WITH ENHANCED PLASTICITY, Int. J. of Modern Physics B 23(6-7) (2009)
  • Preparation of titanate nanotube thin film using hydrothermal method, Thin Solid Films 516(23) (2008)
  • Formation of nano-scale w-phase in arc-melted micro-scale dendrite, Intermetallics 16(4) (2008)
  • Characteristics of carbon nanotubes grown by mesh-inserted plasma-enhanced chemical vapor deposition, Carbons 45 (2007)
  • Mechanical properties of fully porous and porous-surfaced Ti-6Al-4V implants fabricated by electro-discharge-sintering, Journal of Materials Process and Technology 194 (2007)
  • Consolidation of mechanical alloyed Ti-37.5 at.% Si powder mixture using an electro-discharge technique, Materials Science and Engineering, A 467 (2007)
  • Ti oxynitriding of microporous Ti-6Al-4V compact by electro-discharge-sintering in a N2 atmosphere, Scripta Materialia 57 (2007)
  • Fabrication of fully-porous and porous-surfaced Ti-6Al-4V implants by electro-discharge-sintering of spherical Ti-6Al-4V powders in an one-step process, Journal of Materials Process and Technology 189 (2007)
  • Surface Modification and Heat Treatment of Ti Rod by Electro Discharge, Solid State Phenomena 124 (2007)
  • Synthesis of ZnO nanostructures by thermal evaporation on graphite, Solid State Phenomena 124 (2007)
  • Fomation of icosahedral phase in an Al93Fe3Cr2Ti2 bulk alloy, Journal of Alloys and Compounds 436 (2007)
  • A Study of Hydroxyapatite Coating on Porous Ti Compact by Electrostatic Spray Deposition, Solid State Phenomena 124 (2007)
  • Self -assembled microporous Ti-6Al-4V compacts induced by electro-discharge-sintering, Scripta Materialia 56 (2007)
  • Surface Characteristics of self assembled porous Ti-6Al-4V compacts fabricated by electro-discharge-sintering in air, Applied Surface Science 253 (2007)
  • Self-assembled bulk metallic glass composite prepared by electro discharge bonding technique, Materials Science and Engineering, A 447 (2007)
  • One-step process for the fabrication of Ti porous compact and its surface modification by environmental-electro-discharge-sintering of spherical Ti powders, Surface coating and Technology 200 (2006)
  • Synthesis of porous titanium implant by environmental-electro-discharge-sintering process, Materials Chemistry and Physics 95 (2006)
  • Fracture behavior of bulk metallic glass/metal laminate composites, Materials Science and Engineering A 417 (2006)
  • Surface characteristics of porous titanium implant fabricated by Environmental-Electro-Discharge-Sintering of spherical Ti powders in a vacuum atmosphere, Scripta Materialia 53(8) (2005)
  • Mechanical properties of environmental-electro-discharge-sintered porous Ti implants, Materials Letters 59(17) (2005)
  • Effects of pore structure and surface state on the adsorption properties of nano-porous carbon materials in low and high relative pressures, Applied Surface Science 246(1-3) (2005)
  • Fabrication of fully-porous and porous-surfaced Ti-6Al-4V implants by Electro-discharge-sintering of spherical Ti-6Al-4V powders and their osseointegration ability, Key Engineering Materials 288-289 (2005)

  •  
  • [국내]
  • Rapid Consolidation Mechanism of Titanium Aluminide Solid Compact via Electric Discharging Through Elemental Ti and Al Powder Mixture, METALS AND MATERIALS INTERNATIONAL 25 (2019)
  • Self-Consolidation Mechanism of Porous-Surfaced Ti Implant Compacts Induced by Electro-Discharge-Sintering of Spherical Ti Powders, Metals And Materials International 21 (2015)
  • Rapid Formation of Ti Oxycarbide on the Surface of Ti Induced by Electro-Discharge-Heat-Treatment in a Low Vacuum Atmosphere, Metals And Materials International 21 (2015)
  • Thermal and mechanical properties of Cu60-xZr25Ti15Nix bulk metallic glasses with x=0, 1, 3, 5, 7, 9 and 11 at.%, Metals And Materials International 20 (2014)
  • Effect of Microstructure Modulation on Mechanical Properties of Ti-Fe-Sn Ultrafine Eutectic Composites, METALS AND MATERIALS INTERNATIONAL 17 (2011)
특허
  • [국외]
  • Plastic system and method of porous bioimplant having a unified connector, 2008-05 (등록)

  •  
  • [국내]
  • 목재로부터 유래된 셀룰로오스를 이용하여 제조된 고강도 금속 및 이의 제조방법, 2024-02 (등록)
  • 목재로부터 유래된 셀룰로오스를 이용하여 제조된 고강도 금속 및 이의 제조방법, 2021-11 (출원)
  • 열수 처리된 다공성 티타니아 박막 및 이의 제조방법 , 2019-03 (출원)
  • 유사골 다공성 금속 구조체 및 이의 제조방법, 2016-09 (등록)
  • 폴리도파민이 코팅된 서방형 다공성 임플란트 및 이의 제조방법, 2016-01 (출원)
  • 다공성 임플란트, 및 이의 제조 방법, 2014-12 (등록)
  • 하이드록시 아파타이트가 코팅된 다공성 임플란트 픽스쳐 및 그의 제조방법, 2013-06 (등록)
  • 유사골 다공성 금속 구조체 및 이의 제조방법, 2013-03 (출원)
  • 하이드록시 아파타이트가 코팅된 다공성 임플란트 픽스쳐 및 그의 제조방법, 2012-11 (등록)
  • 다공성 임플란트, 및 이의 제조 방법, 2012-09 (출원)
  • 다공성 임플란트 및 그의 제조 방법, 2011-10 (출원)
  • 다공성 임플란트의 제조방법 및 그로부터 제조된 다공성 임플란트, 2011-09 (출원)
  • 하이드록시 아파타이트가 코팅된 티타늄 임플란트 픽스쳐 및 그의 제조방법, 2010-08 (출원)
  • 하이드록시 아파타이트가 코팅된 다공성 임플란트 픽스쳐 및 그의 제조 방법, 2010-08 (출원)
  • 다양한 형상을 갖는 다공성 치과용 임플란트 픽스쳐 및 그 제조 방법, 2008-09 (등록)
저역서
  • 재료과학, 2023-08
  • 재료과학, 2017-11
  • 재료과학, 2006-09
학술발표
  • 수열합성에 의한 NiTi의 표면개질 연구, 2021 대한금속재료학회 추계학술대회(대한금속재료학회), 2021-10
  • Highly efficient DSSC(dye-sensitized solar cell) by using cellulose nanocrystal derivatives, 2021 대한금속재료학회 춘계학술대회(대한금속재료학회), 2021-04
  • Study of DSSC(dye-sensitized solar cell) using porous titania fabricated by nanocellulose derivatives, The 16th International Symposium on Novel and Nano Materials(Institute of Metallurgy and Materials Science,kpmi), 2020-11
  • Fabrication of DSSC(Dye-Sensitized-Solar-Cell) by using Cellulose Nanostructure Derivatives, The 6th International Conference on Electronic Materials and Nanotechnology for Green Environmenet(The Korean Institute of Metals And Materials), 2020-11
  • Fabrication of DSSC(dye-sensitized solar cell) by usinh cellulose nanostructure debrivatives, 2020 대한금속재료학회 추계학술대회((사)대한금속재료학회), 2020-10
  • 셀룰로오스 나노수조체 이용 염료감응 태양전지(DSSC)의 특성향상 연구, 2020 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2020-07
  • Fabrication of orthopedic implant material using Mg-Ti composite by EDS, 한국분말야금학회 추계학술강연 및 발표대회(한국분말야금학회), 2019-11
  • 셀룰로오스 나노구조체를 이용한 다공성 티타니아 광전지 전극소재 연구, 대한금속재료학회 추계학술대회(대한금속재료학회), 2019-10
  • 셀룰로오스 나노구조체를 이용한 다공성 티타니아의 광전지 전극소재 연구, 한국재료학회 추계학술대회(한국재료학회), 2019-10
  • Mesoporous titania films templated by cellulose nanocrystals: morphological and spectrophotometric properties, E-MRS(MRS(Materials Research Society)), 2019-09
  • Fabrication of orthopedic implant material using Mg-Ti composite by EDS, E-MRS(MRS), 2019-09
  • A study on improving the corrosion resistance of Mg-5Ca-1Zn alloy by the formation of oxide films using anodic oxidation, E-MRS(MRS), 2019-09
  • Highly transparent and mesoporous molybedeun-doped TiO2 films templated by cellulose nanocrystals, 한국분말야금학회 춘계학술강연 및 발표대회(한국분말야금학회), 2019-04
  • 전기방전소결을 통한 정형외과 임플란트 소재용 Mg-Ti 분말 복합소재 제조 연구, 한국분말야금학회 춘계학술강연 및 발표대회(한국분말야금학회), 2019-04
  • WC-Co 합금에 유기소재첨가를 통한 절삭공구용 소재의 강도 및 내마모성 향상에 관한 연구, 한국분말야금학회 춘계학술강연 및 발표대회(한국분말야금학회), 2019-04
  • Photocatalytic performance of highly transparent and mesoporous molybedeum-doped titania films fabricated by templating cellulose nanocrystals, 대한금속재료학회 춘계학술대회(대한금속재료학회), 2019-04
  • 전기방전소결(Electro-Discharge-Sintering)을 통한 정형외과 임플란트 소재용 Mg-Ti분말 복합 소재제조 연구, 대한금속재료학회 춘계학술대회(대한금속재료학회), 2019-04
  • Mesoporous titania films templated by cellulose nanocrystals: morphological and spectrophotometric properties, The 5th International Conference & Exhibition for Nanotechnology(경남신문), 2018-11
  • 양극산화를 이용한 Mg-Ca합금 표면산화막 형성 및 이에따른 부식저항성 향상에 관한 연구, 2018 추계학술강연 및 발표대회 (한국분말야금학회), 2018-11
  • 셀룰로오스 나노크리스탈을 이용한 다공성 티타니아 박막의 습/건식 광촉매 소재로의 응용 및 특성 향상, 2018 추계학술강연 및 발표대회 (한국분말야금학회), 2018-11
  • 셀룰로오스 나노크리스탈을 이용한 다공성 티타니아 박막의 습/건식 광촉매 소재로의 응용 및 특성 향상, 2018 추계학술강연 및 발표대회 (한국분말야금학회), 2018-11
  • 전기방전소결을 이용한 Ti-Mg분말의 임플란트 소재 제조 연구, 2018 추계학술강연 및 발표대회 (한국분말야금학회), 2018-11
  • Property improvement of porous titania thin film using cellulose nanocrystal applied at wet/dry photocatalyst materials, 2018 대한금속재료학회 추계학술대회 (대한금속재료학회), 2018-10
  • Fabrication of porous titanium compacts coated with polydopamine and their characteristics of bone morphogenetic protein release in simulated body fluid, The 15th International Symposium on Novel and Nano Materials(KPMI), 2018-07
  • X-ray photoelectron spectroscopic characteristics of self-assembled microporous Ta-Ti composite compacts fabricated by electro-discharge-sintering, The 15th International Symposium on Novel and Nano Materials (KPMI), 2018-07
  • Photocatalytic performance of highly transparent and mesoporous molybdenum-doped titania thin films fabricated by templating cellulose nanocrystals, The 15th International Symposium on Novel and Nano Materials (KPMI), 2018-07
  • Mechanism for one-step process of alloying and consolidation of Ti5Si3 compacts through electro-discharge-sintering of elemental Ti and Si powder mixture, The 15th International Symposium on Novel and Nano Materials (KPMI), 2018-07
  • 나노다이아를 도핑한 Ti-6Al-4V를 전기방전소결한 복합재료의 기계적 특성, 2018 춘계학술강연 및 발표대회(한국분말야금학회), 2018-04
  • Fabrication process of porous titania thin films with a high specific surface area using nano-cellulose and analysis of their characteristics , 2018 대한금속재료학회 춘계학술대회 (대한금속재료학회), 2018-04
  • 고방열 특성을 갖는 Si 복합체 패드 및 그리스 제조, 2018 대한금속재료학회 춘계학술대회(대한금속재료학회), 2018-04
  • 나노셀룰로오스를 이용한 고비표면적을 갖는 다공성 티타니아 박막제조 및 물성분석, 2018 춘계학술강연 및 발표대회 (한국분말야금학회), 2018-04
  • Preparation method of porous titania thin film using cellulose nanocrystal, The 4th International Cellulose Conference(Kyushu University School of Medicine), 2017-10
  • A study on microstructure and mechanical properties of TNZ40 compacts fabricated by EDS (Electro-discharge-sintering), 대한금속재료학회 춘계학술대회(대한금속재료학회 ), 2017-04
  • A research on decreased average pore size of microporous Ti implants, 대한금속재료학회 춘계학술대회(대한금속재료학회), 2017-04
  • 셀룰로오스 나노구조 유도체를 이용한 다공성 티타니아(TiO2) 박막제조 과정, 한국분말야금학회 춘계학술강연 및 발표대회(한국분말야금학회), 2017-04
  • 미세기공을 가진 Ti 임플란트의 평균기공 크기를 줄이기 위한 연구, 한국분말야금학회 춘계학술강연 및 발표대회(한국분말야금학회 ), 2017-04
  • 전기방전을 이용한 TNZ40 합금의 미세조직과 기계적 성질변화 연구, 한국분말야금학회 춘계학술강연 및 발표대회(한국분말야금학회 ), 2017-04