연구활동 Research activities

논문
  • [국외]
  • Role of Cr Element in Highly Dense Passivation of Fe-Based Amorphous Alloy, Materials (2024)
  • Corrosion mode evaluation of Fe-based glassy alloys with metalloid elements by electrochemical noise (EN), Applied Surface Science (2024)
  • Influence of the Gas Flow Rate on the Crack Formation of AlCoCrNi High-Entropy Metallic Film Fabricated Using Magnetron Sputtering, Coatings (2024)
  • Expansion of chromatic color range and improvement of mechanical properties on Cu–Ge supersaturated solid solution alloys, Journal of Materials Research and Technology (2024)
  • Designing L21-Co2TiAl precipitate-strengthened ferritic alloys with excellent high-temperature mechanical properties, Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing (2024)
  • Recent Developments in Ultrafine Shape Memory Alloys Using Amorphous Precursors, Materials (2023)
  • Large enhancement of yield strength in Ti80Cr20−x(CoFeNi)x alloys by modulating phase stability and introducing ultrafine eutectic structure, Journal of Alloys and Compounds 964 (2023)
  • Influence of grain boundary modification on color transition behavior of Cu-Al-Zn-Sn alloys with low stacking fault energy, Journal of Alloys and Compounds 960 (2023)
  • Correlation between micro-to-macro mechanical properties and processing parameters on additive manufactured 18Ni-300 maraging steels, Journal of Alloys and Compounds 960 (2023)
  • Role of Cr Element in Highly Dense Passivation of Fe-Based Amorphous Alloy, Materials (2023)
  • Evolution of microstructure and mechanical characteristics of (CrFeNiCu)100-xTix high-entropy alloys, Rare Metals 42 (2023)
  • Evolution of microstructure and mechanical properties of a Ti80(CoFeNi)20 ultrafine eutectic composite during thermal processing, Intermetallics 154 (2023)
  • Investigation of correlation between the microstructural characteristics and mechanical properties of (CoCuFeNi)100-xAlx high entropy alloys, Journal of Alloys and Compounds 933 (2023)
  • Analysis of phase transformation and deformation behaviors on Laves phase of as-cast (CoCuFeNi)100-xZrx high entropy alloys, Journal of Alloys and Compounds (2022)
  • The effects of Al2Au phase and oxide film on dealloying performances of Al50Au50 ribbon, Intermetallics (2022)
  • Development and Characterization of Blue-Colored Mg2Si-Based Recycled Alloys Using Scrap Light Metals, Journal of Sustainable Metallurgy (2022)
  • Enhancement of thermoelectric performance of Bi0.5Sb1.5Te3 alloy by inclusion of LaVO3 Mott insulator, Chemical Engineering Journal (2022)
  • Formation of photo-reactive heterostructure from a multicomponent amorphous alloy with atomically random distribution, Journal Of Materials Science & Technology (2022)
  • Developing harmonic structure in CoCrFeMnNi high entropy alloy to enhance mechanical properties via powder metallurgy approach, Journal of Materials Research and Technology (2022)
  • Nanocrystalline single-phase high-entropy alloy synthesized by using intermetallic compound type (TiZrHf)-(NiCuCo) high-entropy metallic glass precursor, Scripta Materialia (2022)
  • Fabrication of ultrafine powder using processing control agent, and investigation of its effect on microstructure and thermoelectric properties of p-type (Bi, Sb)(2)Te-3 alloys, Advanced Powder Technology (2022)
  • Stress-induced transformation behavior in near-eutectic (AlNi2)(70-x)Co30Crx medium entropy alloys, Journal Of Alloys And Compounds 891 (2022)
  • Recent development of coloring alloys , Progress In Materials Science 123 (2022)
  • Investigation of phase-transformation path in TiZrHf(VNbTa)x refractory high-entropy alloys and its effect on mechanical property, Journal Of Alloys And Compounds 886 (2021)
  • Formation of inhomogeneous micro-scale pores attributed ultralow kappa(lat) and concurrent enhancement of thermoelectric performance in p-type Bi0.5Sb1.5Te3 alloys, Journal of Alloys and Compounds 881 (2021)
  • Design of nano-scale multilayered nitride hard coatings deposited by arc ion plating process: Microstructural and mechanical characterization, Journal of Materials Research and Technology 15 (2021)
  • Beyond strength-ductility trade-off: 3D interconnected heterostructured composites by liquid metal dealloying, Composites Part B: Engineering (2021)
  • Hierarchical heterostructured FeCr-(Mg-Mg2Ni) composite with 3D interconnected and lamellar structures synthesized by liquid metal dealloying, Journal of Materials Research and Technology 15 (2021)
  • Development of coherent-precipitate-hardened high-entropy alloys with hierarchical NiAl/Ni2TiAl precipitates in CrMnFeCoNiAlxTiy alloys, Materials Science & Engineering A: Structural Materials: Properties, Microstructure And Processing 823 (2021)
  • Cryo-Casting for Controlled Decomposition of Cu–Zr–Al Bulk Metallic Glass into Nanomaterials: Implications for Design Optimization, ACS Applied Nano Materials 4 (2021)
  • Investigation of graphene dispersion on thermoelectric, magnetic, and mechanical properties of p-type Bi0.5Sb1.5Te3 alloys, Materials Chemistry And Physics 266 (2021)
  • Nano-scale structural evolution of quaternary AlCrFeNi based high entropy alloys by the addition of specific minor elements and its effect on mechanical characteristics, Journal Of Alloys And Compounds 868 (2021)
  • Understanding the microstructure and mechanical properties of TaxAl0.7CoCrFeNi2.1 eutectic high entropy composites: Multi-scale deformation mechanism analysis, Composites Part B-Engineering 214 (2021)
  • Effect of chemical corrosion and alloying on the catalytic activity of 18 carat gold for the electro-oxidation of HCOOH, Journal Of Alloys And Compounds 863 (2021)
  • Development of Precipitation-Strengthened Al0.8NbTiVM (M = Co, Ni) Light-Weight Refractory High-Entropy Alloys, Materials 14 (2021)
  • Induction and pore-formed stages in Al2Au's dealloying process in HCl solutions, Corrosion Science (2021)
  • Ultrafine shape memory alloys synthesized using a metastable metallic glass precursor with polymorphic crystallization, Applied Materials Today 22 (2021)
  • Developing High-Strength Ferritic Alloys Reinforced by Combination of Hierarchical and Laves Precipitates, Journal Of Alloys And Compounds 856 (2021)
  • Development of coloring alloys: Color Design for Lightweight Al-mg-Si alloys, MATERIALS & DESIGN 200 (2021)
  • Role of Nanocrystallites of Al-Based Glasses and H2O2 in Degradation Azo Dyes, Materials 14 (2021)
  • Grain refinement to improve thermoelectric and mechanical performance in n-type Bi2Te2. 7Se0. 3 alloys, Materials Chemistry and Physics 256 (2020)
  • Mechanical properties and microstructural change in (Cu-Fe) immiscible metal matrix composite: Effect of Mg on secondary phase separation, Journal of Materials Research and Technology 9 (2020)
  • Understanding microstructure and mechanical properties of (AlTa0.76)(x)CoCrFeNi2.1 eutectic high entropy alloys via thermo-physical parameters, Journal Of Materials Science & Technology 57 (2020)
  • Enhancing the acid orange dye degradation efficiency of Mg-based glassy alloys with introducing porous structure and zinc oxide, Journal of Alloys and Compounds (2020)
  • Designing of Fe-containing (Ti33Zr33Hf33)-(Ni50Cu50) high entropy alloys developed by equiatomic substitution: phase evolution and mechanical properties, Journal of Materials Research and Technology 9 (2020)
  • Outstanding strengthening behavior and dynamic mechanical properties of in-situ Al–Al3Ni composites by Cu addition, Composites Part B-Engineering 189 (2020)
  • Relationship between phase stability and mechanical properties on near/metastable beta-type Ti-Cr-(Mn) cast alloys, Journal Of Alloys And Compounds 821 (2020)
  • New para-magnetic (CoFeNi)(50)(CrMo)(50-x)(CB)(x) (x=20, 25, 30) non-equiatomic high entropy metallic glasses with wide supercooled C liquid region and excellent mechanical properties, Journal Of Materials Science & Technology 43 (2020)
  • Studies on directly grown few layer graphene processed using tape-peeling method, Carbon 158 (2020)
  • Influence of N-2 Gas Flow Ratio and Working Pressure on Amorphous Mo-Si-N Coating during Magnetron Sputtering, Coatings 10 (2020)
  • Structural and Mechanical Properties of AlCoCrNi High Entropy Nitride Films: Influence of Process Pressure, Coatings 10 (2020)
  • Investigation of structure and mechanical properties of TiZrHfNiCuCo high entropy alloy thin films synthesized by magnetron sputtering, Journal Of Alloys And Compounds 797 (2019)
  • Compositional tuning induced permanent color adjustment and mechanical properties: Binary Cu-Mg colored metallic system, MATERIALS & DESIGN 175 (2019)
  • Modification of oxygen-ionic transport barrier of BaCo0.4Zr0.1Fe0.4Y0.1O3 steam (air) electrode by impregnating samarium-doped ceria nanoparticles for proton-conducting reversible solid oxide cells, Journal Of The Electrochemical Society 166 (2019)
  • Low-cost beta titanium cast alloys with good tensile properties developed with addition of commercial material, Journal Of Alloys And Compounds 793 (2019)
  • A study on the micro-evolution of mechanical property and microstructures in (Cu-30Fe)-2X alloys with the addition of minor alloying elements, Journal Of Alloys And Compounds 786 (2019)
  • Encapsulation of a gradient Al2O3 layer on hierarchical structured substrate via two-step hybrid processes, MATERIALS & DESIGN 167 (2019)
  • Influence of directional microstructure on mechanical properties in Al‐based ultrafine bimodal lamellar structured alloy, Material Design & Processing Communications 1 (2019)
  • Chemical evolution-induced strengthening on AlCoCrNi dual-phase high-entropy alloy with high specific strength, Journal Of Alloys And Compounds 777 (2019)
  • Optimization of B2/L2(1) hierarchical precipitate structure to improve creep resistance of a ferritic Fe-Ni-Al-Cr-Ti superalloy via thermal treatments, Scripta Materialia 161 (2019)
  • Tailoring the corrosion behavior of Fe-based metallic glasses through inducing Nb-triggered netlike structure , Corrosion Science 147 (2019)
  • Co-Cr-Mo-C-B metallic glasses with wide supercooled liquid region obtained by systematic adjustment of the metalloid ratio, Journal Of Non-Crystalline Solids 505 (2019)
  • Structure modification and recovery of amorphous Fe73.5Si13.5B9Nb3Cu1 magnetic ribbons after autoclave treatment:SAXS and thermodynamic analysis, Journal Of Materials Science And Technology 35 (2019)
  • Mechanical, deformation and fracture behaviors of bulk metallic glass composites reinforced by spherical B2 particles, Progress In Natural Science-Materials International 28 (2018)
  • Carbide formation in electric-discharge-sintered Ti3Al compact caused by steric acid in ball-milled Ti and Al powder mixture, CERAMICS INTERNATIONAL 44 (2018)
  • Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite, Materials Science & Engineering A 735 (2018)
  • Effect of boron addition on thermal and mechanical properties of Co-Cr-Mo-C-(B) glass-forming alloys, INTERMETALLICS 99 (2018)
  • Microstructure and mechanical properties of hierarchical multi-phase composites based on Al-Ni-type intermetallic compounds in the Al-Ni-Cu-Si alloy system, JOURNAL OF ALLOYS AND COMPOUNDS 749 (2018)
  • Thermal analysis of directional pressure annealed Fe78Si9B13 amorphous ribbons, THERMOCHIMICA ACTA 661 (2018)
  • Influence of silicon content on microstructure and mechanical properties of Ti-Cr-Si alloys, Journal Of Alloys And Compounds 737 (2018)
  • Thermally-triggered Dual In-situ Self-healing Metallic Materials, SCIENTIFIC REPORTS 8 (2018)
  • Comparison of catalytic activity between Au(110) and Au(111) for the electro-oxidation of methanol and formic acid: Experiment and density functional theory calculation, Electrochimica Acta (2017)
  • Influence of spherical particles and interfacial stress distribution on viscous flow behavior of Ti-Cu-Ni-Zr-Sn bulk metallic glass composites, Intermetallics 91 (2017)
  • Martensitic transformation in a B2-containing CuZr-based BMG composite revealed by in situ neutron diffraction, Journal Of Alloys And Compounds 723 (2017)
  • Microstructure and mechanical properties of the as-cast and warm rolled Mg-9Li-x(Al-Si)-yTi alloys with x=1, 3, 5 and y=0.05 wt.%, Journal Of Alloys And Compounds 711 (2017)
  • Crystallization and phase transformation behavior of TiCu-based bulk metallic glass composite with B2 particles, Journal Of Alloys And Compounds 707 (2017)
  • Effect of silicon on microstructure and mechanical properties of Cu-Fe alloys, Journal Of Alloys And Compounds 707 (2017)
  • Inorganic gel and liquid crystal based smart window using silica sol-gel process, Solar Energy Materials And Solar Cells 159 (2017)
  • Influence of Zr content on phase formation, transition and mechanical behavior of Ni-Ti-Hf-Zr high temperature shape memory alloys, Journal Of Alloys And Compounds 692 (2017)
  • Deformation mechanisms to ameliorate the mechanical properties of novel TRIP/TWIP Co-Cr-Mo-(Cu) ultrafine eutectic alloys, Scientific Reports 7 (2017)
  • Effect of Ca addition on the plastic deformation behavior of extruded Mg-11Li-3Al-1Sn-0.4Mn alloy, Journal Of Alloys And Compounds 687 (2016)
  • Experimental data of inorganic gel based smart window using silica sol–gel process, Data in Brief (2016)
  • Crystallization kinetics and thermo-mechanical behavior on supercooled liquid region of Ti-Cu-Ni-Zr-Sn-Si bulk metallic glass, Science Of Advanced Materials 8 (2016)
  • Anisotropic magnetization improvement in Fe78Si9B13 glass with direct current heating, Journal Of Non-Crystalline Solids 448 (2016)
  • Development of lightweight Mg-Li-Al alloys with high specific strength, Journal Of Alloys And Compounds 680 (2016)
  • Gradual martensitic transformation of B2 phase on TiCu-based bulk metallic glass composite during deformation, Intermetallics 75 (2016)
  • Characterization of Graphene-based FET Fabricated using a Shadow Mask, Scientific Reports 6 (2016)
  • Crystallization, high temperature deformation behavior and solid-to-solid formability of a Ti-based bulk metallic glass within supercooled liquid region, Journal Of Alloys And Compounds 663 (2016)
  • Flexible polymer dispersed liquid crystal film with graphene transparent electrodes, Current Applied Physics 16 (2016)
  • Understanding the relationship between microstructure and mechanical properties of Al–Cu–Si ultrafine eutectic composites, MATERIALS & DESIGN 92 (2016)
  • Study of Graphene-based 2D-Heterostructure Device Fabricated by All-Dry Transfer Process, Acs Applied Materials & Interfaces 8 (2016)
  • Fabrication of Fe-based bulk metallic glass by selective laser melting : A parameter study, Materials And Design 86 (2015)
  • Role of tri-capped triangular prism(TTP) polyhedra in formation and destabilization of Fe-Y-B glassy alloys, Journal Of Non-Crystalline Solids 425 (2015)
  • Influence of microstructural evolution on mechanical behavior of Fe-Nb-B ultrafine composites with a correlation to elastic modulus and hardness, Journal Of Alloys And Compounds 647 (2015)
  • Enhancement of mechanical properties in a Fe81Nb9B10 ultrafine-eutectic composite with in-situ polygonal pro-eutectic and encapsulating eutectic structure, Journal Of Alloys And Compounds 643 (2015)
  • Enhanced proton conductivity of yttrium-doped barium zirconate with sinterability in protonic ceramic fuel cells, Journal Of Alloys And Compounds 639 (2015)
  • Work-hardening and plastic deformation behavior of Ti-based bulk metallic glass composites with bimodal sized B2 particles, Intermetallics 62 (2015)
  • Improving the plasticity and strength of Fe–Nb–B ultrafine eutectic composite, Materials And Design 76 (2015)
  • Formation of nano-porous GeOx by de-alloying of an Al-Ge Mn amorphous alloy, Scripta Materialia 104 (2015)
  • Designing porous metallic glass compact enclosed with surface iron oxides, Journal Of Alloys And Compounds 635 (2015)
  • Effect of Metallic Glass Particle Size on the Contact Resistance of Ag/Metallic Glass Electrode, Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science 46A (2015)
  • degradation analysis of anode-supported intermediate temperature-solid oxide fuel cells under various failure mode, Journal Of Power Sources 276 (2015)
  • Electrochemical properties of dual phase neodymium-doped ceria alkali carbonate composite electrolytes in intermediate temperature, Journal Of Power Sources 275 (2015)
  • Effect of annealing in Ar/H-2 Environment on chemical vapor deposition-grown graphene transferred with poly (methyl methacrylate), Ieee Transactions On Nanotechnology 14 (2015)
  • Electrochromic Device Containing Heptyl Viologen, PEDOT, TiO2 and TEMPO, Journal Of The Electrochemical Society 161 (2014)
  • Mechanically stable tuning fork sensor with high quality factor for the atomic force microscope, Scanning (2014)
  • Degradation pattern prediction of a polymer electrolyte membrane fuel cell stack with series reliability structure via durability data of single cells, Applied Energy 131 (2014)
  • Micro-to-nano-scale deformation mechanisms of a bimodal ultrafine eutectic composite, Scientific Reports 4 (2014)
  • Chemical heterogeneity-induced plasticity in Ti-Fe-Bi ultrafine eutectic alloys, Materials And Design 60 (2014)
  • Characterization and deformation behavior of Ti hybrid compacts with solid-to-porous gradient structure, Materials And Design 60 (2014)
  • New metric for evaluating the purity of single-walled carbon nanotubes using ultraviolet-visible-near infrared absorption spectroscopy , Carbon 75 (2014)
  • phase transformation and mechanical properties of as-cast Ti41.5Zr41.5Ni17 Quasicrystalline composites, Journal Of Non-Crystalline Solids 392 (2014)
  • Combinatorial Influence of Bimodal Size of B2 TiCu Compounds on Plasticity of Ti-Cu-Ni-Zr-Sn-Si Bulk Metallic Glass Composites, Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science 45A (2014)
  • Post-mortem analysis of a long-term tested proton exchange membrane fuel cell stack under low cathode humidification conditions, Journal Of Power Sources 253 (2014)
  • Plastic deformation behavior of Fe-Co-B-Si-Nb-Cr bulk metallic glasses under nanoindentation, Journal Of Alloys And Compounds 587 (2014)
  • Degradation mechanisms and mitigation strategies of metal cations in recycled fuel for direct methanol fuel cell membrane electrode assembly, JOURNAL OF POWER SOURCES 242 (2013)
  • Heterogeneous duplex structured Ti-Sn-Mo alloys with high strength and large plastic deformability, JOURNAL OF ALLOYS AND COMPOUNDS 574 (2013)
  • Various synthesis methods of aliovalent-doped ceria and their electrical properties for intermediate temperature solid oxide electrolytes , International Journal Of Hydrogen Energy 38 (2013)
  • Necking mechanisms on porous metallic glass and W compacts using electro-discharge sintering, Journal of Alloys and Compounds 536 (2012)
  • Lifetime prediction of a polymer electrolyte membrane fuel cell via an accelerated startup-shutdown cycle test, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY 37 (2012)
  • High-speed atomic force microscopy with phase-detection, Current Applied Physics 12 (2012)
  • High-current field emission of point-type carbon nanotube emitters on Ni-coated metal wires, CARBON 50 (2012)
  • Field emission characteristics of carbon nanotube films fabricated on a metal mesh by filtration , Journal of Alloys and Compounds 521 (2012)
  • Optimization of mechanical properties of Ti-Fe-Sn alloys by controlling heterogeneous eutectic structure, INTERMETALLICS 23 (2012)
  • Solid-state phase transformation-induced heterogeneous duplex structure in Ti-Sn-Fe alloys, JOURNAL OF ALLOYS AND COMPOUNDS 515 (2012)
  • The stress-dependent piezoelectric coefficient of ZnO wire measured by piezoresponse force microscopy , SCRIPTA MATERIALIA 66 (2012)
  • Viscosity dependence of electrochemical etching for gold tip fabrication, Current Applied Physics (2011)
  • Spectroscopic studies and electrical properties of transparent conductive films fabricated by using surfactant-stabilized single-walled carbon nanotube suspensions, Carbon 49-13 (2011)
  • Effect of solubility on strengthening of Ag-Cu ultrafine eutectic composites, Journal of Alloys and Compounds 509-37 (2011)
  • Graphite patterning in a controlled gas environment, Nanotechnology (2011)
  • Influence and mitigation methods of reaction intermediates on cell performance in direct methanol fuel cell system, Journal of Power Sources 196-13 (2011)
  • Formation of bimodal eutectic structure in Ti(63.5)Fe(30.5)Sn(6) and Mg(72)Cu(5)Zn(23) alloys , JOURNAL OF ALLOYS AND COMPOUNDS 509-1 (2011)
  • Formation of porous metallic glass compacts by electro-discharge sintering, Journal of Alloys and Compounds 509-1 (2011)
  • Microstructure and mechanical properties of Fe-Si-Ti-(Cu, Al) heterostructured ultrafine composites, Journal of Alloys and Compounds 509-1 (2011)
  • Heterogeneous eutectic structure in Ti-Fe-Sn alloys , Intermetallics 19-4 (2011)
  • Stable operation of air-blowing direct methanol fuel cell stacks through uniform oxidant supply by varying fluid flow fixtures and developing the flow sensor, Inernational Journal of Hydrogen Energy 36-15 (2011)
  • Application of Scanning Probe Lithography to Graphite Patterning, Journal of Nanoscience and Nanotechnology 11-2 (2011)
  • Evolution of constitution, structure, and mechanical properties in Fe-Ti-Zr-B heterogeneous multiphase composites, Journal of Materials Research (2011)
  • Evolution of constitution, structure, and mechanical properties in Fe-Ti-Zr-B heterogeneous multiphase composites, JOURNAL OF MATERIALS RESEARCH 26-3 (2011)
  • Improving the plasticity of a high strength Fe-Si-Ti ultrafine composite by introduction of an immiscible element, APPLIED PHYSICS LETTERS 97-25 (2010)
  • Effect of Si on microstructure and mechanical properties of Fe-based ultrafine eutectic composites, Intermetallics (2010)
  • Influence of hetero-duplex structure on mechanical properties of Mg-Al/Cu-Zn alloys, Materials science & engineering A 528-1 (2010)
  • Mechanical properties of rippled structure in suspended stacks of graphene, JOURNAL OF APPLIED PHYSICS 108-1 (2010)
  • Synthesis of bulk amorphous composites with three amorphous phases by consolidation of milled amorphous powders, INTERMETALLICS 18-10 (2010)
  • Enhanced Work Hardening of Cu-based Bulk Metallic Glass Composites by in-situ Formed Nano-scale Heterogeneities, Materials Science Forum 18 (2010)
  • Mechanical behavior of metallic glass reinforced nanostructured tungsten composites synthesized by spark plasma sintering, INTERMETALLICS 18-10 (2010)
  • Effect of Nb on microstructure and mechanical properties of ultrafine eutectic Fe-Ni-B-Si composites, JOURNAL OF ALLOYS AND COMPOUNDS 504 (2010)
  • Decomposition of Icosahedral Phase in Ti52Zr28Ni20 powder during Electro-Discharge-Sintering, Journal of alloys and compounds 504 (2010)
  • Microstructural modulations enhance the mechanical properties in Al-Cu-(Si, Ga) ultrafine composites, Advanced Engineering Materials 12-11 (2010)
  • Fabrication of porous Ti and W compacts by electro-discharge-sintering process, Surface Review and Letters 17-2 (2010)
  • Effect of martensitic ω phase on mechanical properties of Ti100?xCox alloys with x = 5, 7 and 9, Intermetallics 18-4 (2010)
  • Multi-phase Al-based ultrafine composite with multi-scale microstructure, Intermetallics 18-10 (2010)
  • Real-time atomic force microscopy in lubrication condition, Ultramicroscopy 110-7 (2010)
  • Effect of micro and nanoparticle inorganic fillers on the field emission characteristics of photosensitive carbon nanotube pastes, Applied Surface Science 256-8 (2010)
  • Medium range ordering and its effect on plasticity of Fe-Mn-B-Y-Nb bulk metallic glass, Philosophical Magazine 90-19 (2010)
  • Deformation mechanisms of a bimodal eutectic Mg72Cu5Zn23 ultrafine composite, Materials Letters 64-4 (2010)
  • The surface structure of gas-atomized metallic glass powders, Scripta Materialia 62-5 (2010)
  • Microstructural modulation of Ti-Fe-V ultrafine eutectic alloys with enhanced mechanical properties, Journal of alloys and compounds 491(1-2) (2010)
  • Effects of Co on the microstructures and mechanical properties of Ti50Cu50-xCox alloys (x=0-25 at.%), Philosophical Magazine Letters 90-1 (2010)
  • Role of heterogeneity on deformation behavior of bulk metallic glasses, JOURNAL OF ALLOYS AND COMPOUNDS 486 (2009)
  • Crack evolution in bulk metallic glasses, Journal of Applied Physics 106-10 (2009)
  • Favorable microstructural modulation and enhancement of mechanical properties of Ti-Fe-Nb ultrafine composites, PHILOSOPHICAL MAGAZINE LETTERS 89 (2009)
  • Microstructural evolution and mechanical properties of Mg-Cu-Zn ultrarine eutectic composites , JOURNAL OF MATERIALS RESEARCH 24 (2009)
  • Modeling deformation behavior of Cu-Zr-Al bulk metallic glass matrix composites, APPLIED PHYSICS LETTERS 95 (2009)
  • Sn effect on microstructure and mechanical properties of ultrafine eutectic Ti-Fe-Sn alloys, JOURNAL OF ALLOYS AND COMPOUNDS 483 (2009)
  • High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity, JOURNAL OF MATERIALS RESEARCH 24 (2009)
  • Microstructure and mechanical properties of metallic glass/metallic glass composites, JOURNAL OF ALLOYS AND COMPOUNDS 483 (2009)
  • Mechanical properties of large-scale Mg-Cu-Zn ultrafine eutectic composites, JOURNAL OF ALLOYS AND COMPOUNDS 481 (2009)
  • Deformation-induced martensitic transformation in Cu-Zr-(Al,Ti) bulk metallic glass composites, SCRIPTA MATERIALIA 60 (2009)
  • DEVELOPMENT OF HIGH STRENGTH Mg-Cu-Zn ULTRAFINE EUTECTIC COMPOSITES WITH ENHANCED PLASTICITY, INTERNATIONAL JOURNAL OF MODERN PHYSICS B 23 (2009)
  • TEM INVESTIGATION ON CRYSTALLIZATION BEHAVIOR OF A Fe68C10.5Si4.4B6.5P8.6Al2 BULK METALLIC GLASS, INTERNATIONAL JOURNAL OF MODERN PHYSICS B 23 (2009)
  • MICROSTRUCTURAL EVOLUTION AND MECHANICAL PROERTIES OF Ti-(Ni, Fe)-Sn ULTRAFINE EUTECTIC ALLOYS, INTERNATIONAL JOURNAL OF MODERN PHYSICS B 23 (2009)
  • Formation of deformation-induced bimodal grain structure of a high strength Ti93Co7 alloy with enhancing plasticity, JOURNAL OF PHYSICS D-APPLIED PHYSICS 42 (2009)
  • Formation of reactive layers in brazed Ti and Cu using a melt-spun Zr41.2Ti13.8Ni10.0Cu12.5Be22.5 alloy, Materials Letters 62-30 (2008)
  • Enhancement of plasticity in Ti-rich Ti-Zr-Be-Cu-Ni-Ta bulk glassy alloy via introducing the structural inhomogeneity, Journal of Materials Research 23-11 (2008)
  • Influence of a bimodal eutectic structure on the plasticity of a (Ti70.5Fe29.5)(91)Sn-9 ultrafine composite, Applied Physics Letters 93-20 (2008)
  • Formation of a bimodal eutectic structure in Ti-Fe-Sn alloys with enhanced plasticity, Applied Physics Letters 93-14 (2008)
  • Deformation and fracture of Ti-base nanostrucuted composite, International Journal of Materials Research (2008)
  • Deformation and fracture of Ti-base nanostrucuted composite, International Journal of Materials Research 99-9 (2008)
  • Influence of heterogeneities with different length scale on the plasticity of Fe-base ultrafine eutectic alloys, Journal of Materials Research 23-7 (2008)
  • Influence of heterogeneities with different length scale on the plasticity of Fe-base ultrafine eutectic alloys, Journal of Materials Research (2008)
  • Understanding of martensitic (TiCu)-based bulk metallic glasses through deformation behavior of a binary Ti50Cu50 martensitic alloy, Applied Physics Letters (2008)
  • High strength Ni-Zr binary ultrafine eutectic-dendrite composite with large plastic deformability, Applied Physics Letters (2008)
  • Understanding of martensitic (TiCu)-based bulk metallic glasses through deformation behavior of a binary Ti50Cu50 martensitic alloy, Applied Physics Letters 92-24 (2008)
  • High strength Ni-Zr binary ultrafine eutectic-dendrite composite with large plastic deformability, Applied Physics Letters 93-3 (2008)
  • High strength porous Ti-6Al-4V foams synthesized by solid state powder processing, Journal of Physics D 41-10 (2008)
  • High strength porous Ti-6Al-4V foams synthesized by solid state powder processing, Journal of Physics D: Applied Physics (2008)
  • High strength ultrafine eutectic Fe-Nb-Al composites with enhanced plasticity, Intermetallics 16-5 (2008)
  • High strength ultrafine eutectic Fe-Nb-Al composites with enhanced plasticity, Intermetallics (2008)
  • Formation of nano-scale ω-phase in arc-melted micron-scale dendrite reinforced Zr73.5Nb9Cu7Ni1Al9.5 ultrafine composite during heat treatment, Intermetallics 16-4 (2008)
  • Nanocrystallization at shear bands in bulk metallic glass matrix composites, Scripta Materialia 58-8 (2008)
  • Nanocrystallization at shear bands in bulk metallic glass matrix composites, Scripta Materialia (2008)
  • Formation of nano-scale ω-phase in arc-melted micron-scale dendrite reinforced Zr73.5Nb9Cu7Ni1Al9.5 ultrafine composite during heat treatment, Intermetallics (2008)
  • Phase transformations in mechanically milled and annealed single-phase β-Al3Mg2, Acta Materialia (2008)
  • Propagation of shear bands and accommodation of shear strains in Fe56Nb4Al40 ultrafine eutectic-dendrite composites, Applied Physics Letters (2008)
  • Phase transformations in mechanically milled and annealed single-phase β-Al3Mg2, Acta Materialia 56-6 (2008)
  • Propagation of shear bands and accommodation of shear strains in Fe56Nb4Al40 ultrafine eutectic-dendrite composites, Applied Physics Letters 92-9 (2008)
  • Effect of local chemistry, structure and length scale of heterogeneities on the mechanical properties of a Ti45Cu40Ni7.5Zr5Sn2.5 bulk metallic glass, Philosophical Magazine Letters 88-1 (2008)
  • Propagation of shear bands in a Cu47.5Zr47.5Al5 bulk metallic glass, Journal of Materials Research 23-1 (2008)
  • Effect of local chemistry, structure and length scale of heterogeneities on the mechanical properties of a Ti45Cu40Ni7.5Zr5Sn2.5 bulk metallic glass, Philosophical Magazine Letters (2008)
  • Propagation of shear bands in a Cu47.5Zr47.5Al5 bulk metallic glass, Journal of Materials Research (2008)
  • Structural relaxation and glass transition behavior of novel (Ti33Zr33Hf33)50(Ni50Cu50)40Al10 alloy developed by equiatomic substitution, Journal of Non-crystalline solids 353 (2007)
  • Consolidation of mechanical alloyed Ti-Si powder mixture using an electro-discharge technique, materials science & engineering A 467 (2007)
  • deformation-induced rotational eutectic colonies containing length-scale heterogeneity in an ultrafine eutectic FeTiZrB alloy, applied physics letters 91 (2007)
  • Nanostructure-dendrite composites in the Fe-Zr binary alloy system exhibiting high strength and plasticity, scripta materialia 57 (2007)
  • Influence of additional elements on the development of nanoscale hetereogeneties in TiCu-based bulk metallic glasses with enhanced ductility, journal of materials research 22-8 (2007)
  • Impact of microstructural inhomogeneities on the ductility of bulk metallic glasses, materials transaction 48-7 (2007)
  • Ti oxynitriding of microporous Ti-6Al-4V compact by electodischarge sintering in an N-2 atmosphere, scripta materialia 57 (2007)
  • formation of icosahedral phase in an AlCrFeTi alloy, JOURNAL OF ALLOYS AND COMPOUNDS 436 (2007)
  • Enhnaced glass forming ability of Fe-based bulk metallic glasses prepared using hot metals and commercial raw materials through the optimization of Mo, scripta materialia 56 (2007)
  • Microstructural investigation of a deformed TiCuNiSnNb nanostructure-dendrite composite, JOURNAL OF ALLOYS AND COMPOUNDS 434-435 (2007)
  • deformation behavior of a TiCuNiSnNb nanostructured composite containing ductiel dendrites, JOURNAL OF ALLOYS AND COMPOUNDS 434-435 (2007)
  • Bulk ultra-fine eutectic structure in Ti-Fe-based alloys, JORNAL OF ALLOYS AND COMPOUNDS 434-435 (2007)
  • Bulk nanostructure - Dendrite composites: Solidification, microstructure and mechanical properties, Transactions of the Indian Institute of Metals (2007)
  • Devitrification of nano-scale icosahedral phase in multicomponent alloys, Materials Science & Engineering A 449-451 (2007)
  • Self-assembled microporous Ti-6Al-4V implant compacts induced by eletro-discharge-sintering, Scripta Materialia 56 (2007)
  • Microstructural comparison of Zr-based nanostructure-dendrite composites produced by different casting techniques, Materials Science & Engineering A 449-451 (2007)
  • Formation of ductile ultrafine eutectic structure in Ti-Fe-Sn alloy, Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing (2007)
  • Ti-based nanostructure-dendrite composites: microstructure and deformation, Materials Science & Engineering A 449-451 (2007)
  • Self-assembled bulk metallic glass composite prepared by electro discharge bonding technique, Material Sciences and Engineering A 447 (2007)
  • Interfacial reaction during fabriaction of Ni60Nb40 metallic glass partialces-reinforced Al-based MMC, Materials sciene and Engineering A 444 (2007)
  • Amorphization of mechanical alloyed (Ti,Zr,Hf)-(Ni,Cu)-Al equiatomic alloys, Journal of Alloys and Compounds 428 (2007)
  • Amorphization of mechanical alloyed (Ti,Zr,Hf)-(Ni,Cu)-Al equiatomic alloys, Journal of Alloys and Compounds (2007)
  • Interfacial reaction during fabriaction of Ni60Nb40 metallic glass partialces-reinforced Al-based MMC, Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing (2007)
  • Surface modification and heat treatment of Ti rod by electro discharge, Diffusion And Defect Data Pt.B: Solid State Phenomena (2007)
  • A study of hydroxyapatite coating on porous Ti compact by electrostatic spray deposition, Diffusion And Defect Data Pt.B: Solid State Phenomena (2007)
  • Metallic glass formation in Cu47Ti33Zr11Ni8Si1 alloy, Materials science and engieneering A 444 (2007)
  • Metallic glass formation in Cu47Ti33Zr11Ni8Si1 alloy, Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing (2007)
  • Mechano-chemical synthesis and characterization of microstructure and magnetic properties of nanocrystalline Mn1-xZnxFe2O4, Journal of Alloys and Compounds (2006)
  • Ductile metallic glasses in supercooled martensitic alloys, Materials Transaction 47-10 (2006)
  • Be Effect on Glass-Forming Ability and Mechanical Properties of Ti-Cu-Co-Zr-Sn Bulk Metallic Glasses, Materials Transaction 47-9 (2006)
  • High strength ductile Cu-based metallic glass, Intermetallics 14 (2006)
  • Work hadening ability of Ti45Cu40Ni7.5Zr5Sn2.5 and Cu47.5Zr47.5Al5 bulk metallic glasses, Applied Physics Letters 89 (2006)
  • Effect of cooling rate on microstructure and glass-forming ability of a (Ti33Zr33Hf33)70(Ni50Cu50)20Al10 alloy, Intermetallics 14 (2006)
  • Effect of Sn on microstructure and mechanical properties of (Ti-Cu)-based bulk metallic glasses, Philosophical Magazine Letters 86-8 (2006)
  • Microscopic deformation mechanism of Ti66.1Nb13.9Ni4.8Cu8Sn7.2 nanostructure-dendrite composite, Acta Materialia 54 (2006)
  • Effect of Cu on local amorphization in bulk Ni-Ti-Zr-Si alloys during solidification, Acta Materialia (2006)
  • Heterogeneity of a Cu47.5 Zr47.5 Al5 bulk metallic glass, Applied Physics Letters (2006)
  • Deformation-induced nanostructuring in a Ti-Nb-Ta-In β-alloy, Applied Physics Letters 89 (2006)
  • Orthorhombic approximant phases and their relation to quasicrystals in mechanically alloyed Al-Cu-Fe-Si alloys, Philosophical Magazine letters 86-7 (2006)
  • Effect of Cu on local amorphization in bulk Ni-Ti-Zr-Si alloys during solidification, Acta Materialia 54 (2006)
  • Phase stability and its effect on the deformation behavior of Ti-Nb-Ta-In/Cr β alloys, Scripta Materialia 54 (2006)
  • Microscopic deformation mechanism of Ti66.1Cu8Ni4.8Sn7.2Nb13.9 nanostructure-dendrite composite, Acta Materialia 54 (2006)
  • High strength hexagonal structured dendritic phase reinforced Zr-Ti-Ni bulk alloy with enhanced ductility, Applied Physics Letters (2006)
  • High strength hexagonal structured dendritic phase reinforced Zr-Ti-Ni bulk alloy with enhanced ductility, Applied Physics Letters 88 (2006)
  • Enhanced thermal stability of the devitrified nanoscale icosahedral phase in novel multicomponent amorphous alloys, Journal of Materials Research (2006)
  • Fabrication and mechanical properties of Ni-Nb metallic glass particle-reinforced Al-based metal matrix composite, Scripta Materialia (2006)
  • Revisiting the Cu47Ti33Zr11Ni 8Si1 glass-forming alloy, Scripta Materialia (2006)
  • Structural evolution of nano-scale icosahedral phase in novel multicomponent amorphous alloys, Philosophical Magazine (2006)
  • Crystallization behavior and microhardness evolution in Al92-xNi8Lax amorphous alloys, Journal of Materials Research (2005)
  • Fabrication of Fe-based bulk amorphous alloys using hot metal and commercial ferro-alloys, Materials Transactions (2005)
  • Heterogeneous distribution of shear strains in deformed Ti 66.1Cu 8Ni 4.8Sn 7.2Nb 13.9 nanostructure-dendrite composite, Physica Status Solidi (A) Applications and Materials (2005)
  • High-strength Ti-base ultrafine eutectic with enhanced ductility, Applied Physics Letters (2005)
  • Interfacial instability-driven amorphization/nanocrystallization in a bulk Ni45Cu5Ti33Zr16Si1 alloy during solidification, Physical Review B - Condensed Matter and Materials Physics (2005)
  • Toughening mechanisms of a Ti-based nanostructured composite containing ductile dendrites, Zeitschrift Fuer Metallkunde/Materials Research And Advanced Techniques (2005)
  • Lattice distortiondisordering and local amorphization in the dendrites of a Ti66.1 Cu8 Ni4.8 Sn7.2 Nb13.9 nanostructure-dendrite composite during intersection of shear bands, Applied Physics Letters (2005)
  • "work-hardenable" ductile bulk metallic glass, Physical Review Letters (2005)
  • Devitrification of nano-scale icosahedral phase in (Ti 0.33Zr0.33Hf0.33)50(Ni 0.5Cu0.5)40Al10 alloy with enlarging supercooled liquid region, Materials Letters (2005)
  • Propagation of shear bands in Ti66.1 Cu8 Ni 4.8 Sn7.2 Nb13.9 nanostructure-dendrite composite during deformation, Applied Physics Letters (2005)
  • Formation of in-situ nanoscale Ag particles in (Ti0.33Zr 0.33Hf0.33)40(Ni0.33Cu 0.33Ag0.33)50Al10 alloy with wide supercooled liquid region, Materials Letters (2005)
  • Glass-forming ability of novel multicomponent (Ti33Zr33Hf33)-(Ni50Cu50)-Al alloys developed by equiatomic substitution, Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing (2004)
  • Formation of nanocrystals in Ti78Fe15Si7 amorphous alloy with a wide supercooled liquid region, Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing (2004)
  • Glass forming ability and crystallization behaviour of new multicomponent (Ti33Zr33Hf33)60(Ni 50Cu50)20Al20 alloy developed by equiatomic substitution, Journal Of Metastable And Nanocrystalline Materials (2003)
  • Crystallization behaviour in a new multicomponent Ti16.6Zr 16.6Hf16.6Ni20Cu20Al10 metallic glass developed by the equiatomic substitution technique, Philosophical Magazine (2003)
  • Formation of metallic glasses in novel (Ti33Zr33Hf33)100-x-y (Ni50Cu50)xAly Alloys, Materials Transactions (2003)
  • Metallic glass formation in multicomponent (Ti, Zr, Hf, Nb)-(Ni, Cu, Ag)-Al alloys, Journal of Non-Crystalline Solids (2003)
  • Fabrication of a bulk icosahedral material through mechanical alloying of the powder mixture Ti41.5Zr41.5Ni17, Materials Letters (2002)
  • Novel multicomponent amorphous alloys, Materials Science Forum (2002)
  • On the role of carbon in the formation and properties of hot pressed icosahedral Al-Cu-Fe phase, Journal Of Materials Science Letters (2001)
  • Development of nano-sized (icosahedral phase + (Ti,Zr) solid solution) two phase microstructures by mechanical alloying, Scripta Materialia (2001)
  • Formation of nano-sized Ti68Fe26Si6 icosahedral quasicrystalline phase by rapid quenching and mechanical alloying, Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing (2001)
  • Structural evolution during heat treatment of mechanically alloyed Al-Cu-Fe-(Si) alloys, Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing (2001)
  • Structrual evolution of the Ti70Ni15Al15 powders prepared by mechanical alloying, Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing (2001)
  • Ti-based bulk amorphous and quasicrystalline materials prepared by warm process, Materials Science Forum (2001)

  •  
  • [국내]
  • Enhancing mechanical properties of Mg-Gd-Y-Zn alloys via microalloying with Ce and La, KOREAN JOURNAL OF METALS AND MATERIALS 60 (2022)
  • 3D 프린팅으로 제작된 AlCrFeNi 고엔트로피 합금의 분말 입도에 따른 특성 분석, 한국분말야금학회지 (2022)
  • 금속 합금화를 통한 새로운 색 구현 방법, 한국색채학회논문집 (2019)
  • Investigation on the relationship between transition energy and the color change of Cu-M alloys, Metals And Materials International 25 (2019)
  • 금속간 화합물을 이용한 금속 색상구현에 관한 연구, 한국색채학회논문집 (2019)
  • Investigation of Color Change in Cu-Zn Alloys by Reflectivity and Color Difference Analysis, KOREAN JOURNAL OF METALS AND MATERIALS 56 (2018)
  • Development of High Strength Ni–Cu–Zr–Ti–Si–Sn In‑Situ Bulk Metallic Glass Composites Reinforced by Hard B2 Phase, Metals And Materials International 24 (2018)
  • Effects of Fe substitution for Co on the thermal, magnetic, and mechanical properties of the Co-Fe-B-Si-Mo alloy system, JOURNAL OF THE KOREAN PHYSICAL SOCIETY 72 (2018)
  • 저융점 원소의 첨가에 따른 Ti65Fe35 과공정 합금의 미세구조와기계적 특성의 변화, 한국재료학회지 27 (2017)
  • Influence of Nb on Microstructure and Mechanical Properties of Ti-Sn Ultrafine Eutectic Alloy, Metals And Materials International 23 (2017)
  • Phase evolution, microstructure and mechanical properties of equi-atomic substituted TiZrHfNiCu and TiZrHfNiCuM (M = Co, Nb) high-entropy alloys, Metals And Materials International 22 (2016)
  • 수열합성 공정을 이용한 금속 다공체의 나노 산화물 형성, 한국분말야금학회지 22 (2015)
  • Phase transformation and work-hardening behavior of Ti-based bulk metallic glass composite, 한국현미경학회지 45 (2015)
  • Microstructure and mechanical properties of Mg-Li powder by hot rolling process, 한국재료학회지 25 (2015)
  • General algorithm and method for scanning a via hole by using critical-dimension atomic force microscopy, Journal Of The Korean Physical Society 64 (2014)
  • Investigation of the mechanical properties of Ti-Fe-Sn ultrafine eutectic composites by dendrite phase selection, Metals And Materials International 20 (2014)
  • Thermal and mechanical properties of Cu60-xZr25Ti15Nix bulk metallic glasses with x=0, 1, 3, 5, 7, 9 and 11 at.%, Metals And Materials International 20 (2014)
  • Thermal stability, mechanical properties and Magnetic properties of Fe-based Amorphous Ribbons with the Addition of Mo and Nb, Journal Of Magnetics 18 (2013)
  • 화학적 침출법을 통한 표면 다공성 Al-Cu-Si 공정합금 제조, 한국재료학회지 23 (2013)
  • TiFe 공정합금의 미소합금 첨가에 따른 미세구조 변화 및 기계적 물성, 한국재료학회지 22 (2012)
  • Effect of Microstructure Modulation on Mechanical Properties of Ti-Fe-Sn Ultrafine Eutectic Composites, Metals and Materials International 17-6 (2011)
  • 전기방전소결을 이용한 Ti-Ni-Zr 준 결정상의 상변화 연구와 Ti, W 다공체 제작Phase transformation of ti-ni-zr icosahedral phase and fabrication of porous ti and w compacts using electro-discharge sintering, 한국분말야금학회지 Journal of Korean Powder Metallurgy Institute 18-2 (2011)
  • Effect of Additional Zn on Plasticity of Large-Scale Mg-Based Nanostructure-Dendrite Composites, METALS AND MATERIALS INTERNATIONAL 15 (2009)
  • Influence of Deposition Temperature and Substrate Orientation on the Microstructure of Pr0:7Ca0:3MnO3 Films Grown on Platinum Substrates by Using Pulsed Laser Deposition, Journal of the Korean Physical Society 54 (2009)
  • Ozone Electrical Trimming of Carbon Nanotubes to Improve Their Field-Emission Lifetime and Uniformity, JOURNAL OF THE KOREAN PHYSICAL SOCIETY 54 (2009)
  • Sn첨가에 따른 극미세 Ti-Fe-Sn 합금의 미세조직 및 기계적 성질 변화, 한국주조공학회지 (2008)
  • Sn첨가에 따른 극미세 Ti-Fe-Sn 합금의 미세조직 및 기계적 성질 변화, 한국주조공학회지 28-2 (2008)
특허
  • [국외]
  • 로즈골드색 구리 합금 및 이의 용도 　, 2023-05 (등록)
  • 로즈골드색 구리 합금 및 이의 용도 　, 2022-12 (등록)
  • 자동차 가니쉬용 합금 및 자동차용 가니쉬, 2022-07 (등록)
  • 자동차 가니쉬용 합금 및 자동차용 가니쉬, 2020-07 (등록)
  • 음극 활물질 및 이의 제조 방법, 2020-05 (등록)
  • 로즈골드색 구리 합금 및 이의 용도 　, 2019-11 (출원)
  • 로즈골드색 구리 합금 및 이의 용도 　, 2019-11 (출원)
  • 다이캐스팅용 알루미늄 합금, 2018-11 (출원)
  • 다이캐스팅용 알루미늄 합금, 2018-11 (출원)
  • 자동차 가니쉬용 합금 및 자동차용 가니쉬, 2018-03 (출원)
  • 자동차 가니쉬용 합금 및 자동차용 가니쉬, 2017-12 (출원)
  • 음극 활물질 및 이의 제조 방법, 2017-05 (출원)

  •  
  • [국내]
  • 마그네슘 합금, 2024-03 (등록)
  • 단상 고엔트로피 합금의 결정립계 불규칙도 제어 방법 및 이에 의해 제조된 고경도 고엔트로피 합금, 2024-03 (출원)
  • 음극 활물질 및 이의 제조 방법, 2024-01 (출원)
  • 단상을 갖는 컬러 합금 구현 기술과 결정립 크기 조절을 통한 컬러 합금 특성 제어 기술, 2024-01 (등록)
  • 로즈골드색 구리 합금 및 이의 용도, 2023-12 (등록)
  • 하이엔트로피합금, 2023-12 (등록)
  • 비정질 박막 및 결정질막을 포함하는 복층막을 포함하는, 다층 박막의 제조방법 및 이에 따라 제조된 다층 박막, 2023-09 (출원)
  • 강도가 향상된 Co-Cu-Fe-Ni-M계 고연성 고엔트로피 합금, 2023-09 (등록)
  • 산화층을 포함하는 코팅된 절삭 공구, 2023-08 (등록)
  • 폴딩 플레이트용 금속 와이어 및 이로 제조된 전자기기용 폴딩 플레이트, 2023-05 (출원)
  • 산화물 버퍼층을 포함하는 코팅된 절삭 공구, 2023-05 (출원)
  • 병치혼합 기반 컬러 합금, 2023-03 (등록)
  • 높은 파괴인성을 갖는 금속 박막 및 이의 제조방법, 2023-03 (출원)
  • 다이캐스팅용 알루미늄 합금, 2022-11 (등록)
  • Cu-Ag-Al의 3원계 컬러 합금, 2022-11 (출원)
  • Cu-Ge계 컬러 합금 제조방법 및 이에 따라 제조된 Cu-Ge계 컬러 합금, 2022-11 (출원)
  • 자동차 가니쉬용 합금 및 자동차용 가니쉬, 2022-10 (등록)
  • 단상의 고엔트로피 합금 제조방법 및 이에 의해 제조된 고엔트로피 합금, 2022-05 (출원)
  • 병치혼합 기반 컬러 합금, 2022-02 (출원)
  • 비정질 합금, 2022-02 (등록)
  • 단상을 갖는 컬러 합금 구현 기술과 결정립 크기 조절을 통한 컬러 합금 특성 제어 기술, 2021-12 (출원)
  • 비정질 및 나노 결정질을 포함하는 합금막의 제조방법 및 비정질 및 나노 결정질을 포함하는 합금막, 2021-11 (출원)
  • 강도가 향상된 Co-Cu-Fe-Ni-M계 고연성 고엔트로피 합금, 2021-09 (출원)
  • 산화층을 포함하는 코팅된 절삭 공구, 2021-08 (출원)
  • 복합 탄성 변형기구를 통해 초저탄성 계수 및 초고탄성 변형능 특성을 나타내는 초고강도 극미세 공정 합금, 2021-07 (등록)
  • 초경합금의 소재 및 코팅물질과 배합구성의 예측 데이터를 제공하는 예측모델 제공방법 및 시스템, 2020-12 (출원)
  • 형상기억합금용 비정질 전구체와 이를 이용한 형상기억합금및 이의 제조방법, 2020-12 (출원)
  • 산화층을 포함하는 코팅된 절삭 공구, 2020-10 (출원)
  • 복합 탄성 변형기구를 통해 초저탄성 계수 및 초고탄성 변형능 특성을 나타내는 초고강도 극미세 공정 합금, 2019-11 (출원)
  • 로즈골드 색상을 나타내는 구리합금 장식재, 2019-08 (등록)
  • 우수한 강도를 갖는 하이엔트로피 합금, 2019-06 (등록)
  • Ti-Fe계 과공정 합금, 2019-03 (등록)
  • 로즈골드색 구리 합금 및 이의 용도, 2018-12 (출원)
  • 구리-실리콘 컬러 합금, 2018-10 (등록)
  • 하이엔트로피합금, 2018-10 (출원)
  • 청색을 갖는 Al-Si-Mg계 합금, 2018-08 (등록)
  • 반도체 공정라인 바닥 패널용 알루미늄 합금 및 그 제조방법, 2018-02 (등록)
  • 다이캐스팅용 알루미늄 합금, 2017-12 (출원)
  • 로즈골드 색상을 나타내는 구리합금 장식재, 2017-12 (출원)
  • 우수한 강도를 갖는 하이엔트로피 합금, 2017-10 (출원)
  • 비정질 전구체를 이용한 나노결정립 형상기억합금 또는비정질 합금을 포함하는 프로브 팁, 이를 포함하는프로브 카드 및 이의 형상 회복 방법, 2017-06 (등록)
  • 자가치유력을 갖는 복합 합금, 2017-05 (등록)
  • 자동차 가니쉬용 합금 및 자동차용 가니쉬, 2017-05 (출원)
  • 우수한 강도 및 연성을 갖는 하이엔트로피 합금, 2017-04 (등록)
  • 구리-실리콘 컬러 합금, 2017-04 (출원)
  • Ti-Fe계 과공정 합금, 2017-03 (출원)
  • 청색을 갖는 Al-Si-Mg계 합금, 2017-01 (출원)
  • 내부와 다른 색상의 외부층을 구비하는 고강도 자성 합금 및 이의 제조방법, 2016-12 (등록)
  • 마그네슘 합금, 2016-12 (출원)
  • 다이캐스팅용 알루미늄 합금, 2016-11 (출원)
  • 우수한 강도 및 연성을 갖는 하이엔트로피 합금, 2016-10 (출원)
  • 타이타늄계 비정질 합금, 2016-10 (출원)
  • 반도체 공정라인 바닥 패널용 알루미늄 합금 및 그 제조방법, 2016-07 (출원)
  • 기계적 특성이 향상된 Sn계 합금, 2016-07 (등록)
  • 음극 활물질 및 이의 제조 방법, 2016-05 (출원)
  • 비정질 전구체를 이용한 나노결정립 형상기억합금 또는비정질 합금을 포함하는 프로브 팁, 이를 포함하는프로브 카드 및 이의 형상 회복 방법, 2016-05 (출원)
  • 자가치유력을 갖는 복합 합금, 2016-03 (출원)
  • 청색을 갖는 Al-Si-Mg계 합금, 2016-02 (출원)
  • 금속 다공체를 사용한 금속 산화물 형성방법 및 이에 의해 형성된 기능성 재료, 2015-10 (등록)
  • 전기화학소자용 구조체, 그의 제조방법, 및 이를 구비하는 전기화학소자, 2015-07 (등록)
  • 내부와 다른 색상의 외부층을 구비하는 고강도 자성 합금 및 이의 제조방법, 2015-06 (출원)
  • 기계적 특성이 향상된 Sn계 합금, 2014-12 (출원)
  • 콜로니 경계 내에 비스무스 또는 납을 함유하는 티타늄-철 합금, 2014-09 (등록)
  • 금속산화물을 포함하는 기능성 재료 및 이의 제조방법, 2014-08 (등록)
  • 우수한 강도 및 연성을 갖는 하이엔트로피 합금, 2014-07 (출원)
  • 비정질 금속 기지 복합 재료, 2014-06 (출원)
  • 비정질 합금, 2014-06 (출원)
  • 컬러 합금, 2014-05 (출원)
  • 전기화학소자용 구조체, 그의 제조방법, 및 이를 구비하는 전기화학소자, 2014-03 (출원)
  • 전극 및 이를 포함하는 광전기화학소자, 2013-06 (출원)
  • B를 함유하는 Fe-Nb공정합금, 2013-01 (출원)
  • 금속산화물을 포함하는 기능성 재료 및 이의 제조방법, 2013-01 (출원)
  • 콜로니 경계 내에 비스무스 또는 납을 함유하는 티타늄-철 합금, 2012-09 (출원)
  • 금속 다공체를 사용한 금속 산화물 형성방법 및 이에 의해 형성된 기능성 재료, 2012-03 (출원)
학술발표
  • Color Transition Behavior of Cu-5Al-5Zn-1Sn Alloy with Low Stacking Fault Energy by Tailoring Grain Boundary, 2023 PRICM11(The Korean Institute of Metals and Materials), 2023-11
  • 과포화 고용체 형성을 통한 단상 컬러 합금의 광학적 및 기계적 특성 개선에 관한 연구, 2023년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2023-10
  • 고용체상 기반의 공정 구조를 갖는 Cu-Ag-Al 합금의 특성 제어 연구, 2023년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2023-10
  • 결정질/비정질 교차상 제어가 가능한 고엔트로피 AlCrFeNi 다층구조 코팅의 미세구조 및 계면 연구, 2023년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2023-10
  • TiCrAlCu 고엔트로피 합금막 및 질화막 설계 및 반응성 DC 마그네트론 스퍼터링 공정변수 제어에 따른 미세조직 및 기계적 물성 변화 분석 , 2023년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2023-10
  • Influence of Ti as an Alloying Element on Microstructural Evolution, Mechanical, and Catalytic Characteristics of CoCrFeNi2 Tix High Entropy Alloys, 2023년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2023-10
  • Cu-Al-Zn-Sn 컬러 합금의 적층 결함 에너지 제어 기반 기계적 및 광학적 특성 제어 연구, 2023년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2023-10
  • CoCuFeNiAlV 고엔트로피 합금의 Al 및 V 원소 함량 변화에 따른 기계 적 물성 분석, 2023년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2023-10
  • Cr 첨가에 따른 Cu-Ni 컬러합금의 광학적 및 기계적 특성 영향 연구, 2023년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2023-10
  • Formation of Functional Nanostructured Materials from Multicomponent Precursors, 2023년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2023-10
  • CoCuFeNiAlV 고엔트로피 합금의 압연 조건에 따른 미세구조 및 기계적 물성 분석, 2023년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2023-10
  • 상분리 기반 (Cu85Ni15)Crx 컬러합금의 강소성 가공에 따른 특성 변화 거동 연구, 2023년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2023-10
  • Influence of V on the microstructure and mechanical parameters of (CrFeNiCu)100-xVx high entropy alloys, 2023년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2023-10
  • DC 마그네트론 스퍼터링 공정변수 제어에 따른 MoNaTaVW 고엔트로피 합금 코팅층의 미세조직 및 기계적 물성 변화 분석, 2023년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2023-10
  • Development of brilliant eutectic alloys, IMC20(Korean Society of Microscopy), 2023-09
  • Influence of Ti as an alloying element on microstructural evolution, mechanical, and Catalytic properties of CoCrFeNi2.1Tix high entropy Alloys, Joint RQ 17 & ISMANAM 27 Conference(RQ17 & ISMANAM 27), 2023-08
  • Effect of grain boundary characteristic on chromaticity of Cu-5Al-5Zn-1Sn alloy, Joint RQ 17 & ISMANAM 27 Conference(RQ17 & ISMANAM 27), 2023-08
  • Influence of Al on the microstructure and mechanical parameters of (CrFeNiCu)100-xAlx high entropy alloys, Joint RQ 17 & ISMANAM 27 Conference(RQ17 & ISMANAM 27), 2023-08
  • 고용체상 기반의 공정 구조를 갖는 Cu-Ag-Al 합금의 특성 제어 연구, 2023년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2023-04
  • Cu-Ge 컬러 합금의 상변태 기반 특성 제어 연구, 2023년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2023-04
  • Cu-5Al-5Zn-1Sn 컬러 합금의 미세조직 제어 기반 전이 에너지 변화 거동 연구, 2023년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2023-04
  • Microstructural evolution of quaternary CrFeNiCu based high entropy alloys by the addition of specific Al and Ti minor elements, 2023년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2023-04
  • Deformation mechanism of Ti80Cr20-x(CoFeNi)x alloys during the addition of alloying elements, 2023년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2023-04
  • 결정질/비정질 교차상 제어가 가능한 고엔트로피 AlCrFeNi 다층구조 코팅의 미세구조 및 기계적 특성에 대한 거동 연구, 2023년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2023-04
  • TiCrAlNiCu 고엔트로피 합금 질화막 설계 및 DC 마그네트론 스퍼터링 공정변수 제어에 따른 미세조직 및 기계적 물성 변화 분석, 2023년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2023-04
  • Influence of Microstructural Evolution on the Mechanical Properties and Deformation Mechanism of CoCrFeNi2.1Tix High Entropy Alloys, 2023년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2023-04
  • CoCuFeNi 기반 고엔트로피 합금의 기계적 특성에 대한 Al 및 V 원소의 영향 , 2023년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2023-04
  • 소성변형과 상분리 기반 Cu-Ni-Cr 컬러합금의 특성 변화 거동 연구, 2023년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2023-04
  • 원자분포 제어를 이용한 물분해 광전극용 반응 맞춤형 플렉서블 합금, 2023년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2023-04
  • CoCuFeNi 합금의 Si 첨가에 따른 기계적 물성 변화에 대한 연구, 2023년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2023-04
  • Microstructure Evolution for Modulate Color of Alloy: Study about Cu- Al-Zn-Sn alloy, TMS 2023(TMS), 2023-03
  • Cu-5Al-5Zn-1Sn 합금의 결정립계 특성 제어 기반 컬러 합금의 특성 변화 거동 연구, 2022년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2022-10
  • Cu-5Al-5Zn-1Sn 컬러 합금의 특성 제어 기술 개발 연구, 2022년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2022-10
  • (CoCuFeNi)92(AlxV8-x)8 하이엔트로피 합금의 개발 및 첨가원소 함량변화에 따른 기계적 특성 분석, 2022년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2022-10
  • Ge의 함량 및 공정 제어에 따른 Cu-Ge계 컬러 합금의 특성 연구, 2022년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2022-10
  • 소성 변형 제어에 따른 컬러합금의 특성 변화 거동 연구, 2022년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2022-10
  • DC 마그네트론 스퍼터링을 통한 TiCrAlNiCu 고엔트로피 질화물 박막의 공정변수 제어에 따른 미세조직 및 기계적 물성 변화 분석, 2022년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2022-10
  • 고용체상 기반의 공정 구조를 갖는 Cu-Ag-Al 합금의 특성 제어 연구, 2022년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2022-10
  • (TiZrNiCu)97Ag3 벌크 비정질 고엔트로피 합금의 전기방전을 통한 비정질 조직 제어에 관한 연구, 2022년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2022-10
  • 증착 온도 제어를 통한 Cu-Cr 박막의 상 형성에 따른 색도 및 기계적 특성 거동 분석, 2022년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2022-10
  • 타겟 분말에 따른 AlCrFeNi 고엔트로피 다층 박막의 미세구조 및 기계적 특성에 대한 거동 연구, 2022년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2022-10
  • 단상 컬러 합금의 미세조직 변형에 따른 특성 제어 연구, 2022년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2022-04
  • 고용체 상 기반 공정 구조를 갖는 컬러 합금 연구, 2022년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2022-04
  • Microstructural evolution and mechanical behavior of hypoeutectic Ti(CoFeNi) alloy by the addition of specific Cr minor element, 2022년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2022-04
  • Mechanical Behavior and Microstructural Evolution of (CrFeNiCu)100-xTix High Entropy Alloys with Increasing Ti Content. , 2022년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2022-04
  • (TiZrNiCu)M 비정질 고엔트로피 합금의 전기방전에 의한 미세조직 및 물성변화에 대한 연구, 2022년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2022-04
  • 마그네트론 스퍼터링을 통한 CuCr 박막의 조성, 타겟 방식에 따른 변화 분석 , 2022년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2022-04
  • Influence of the addition of minor elements Al, Cr, Nb and V on the microstructure and mechanical behavior of Ti90(CoFeNi)10 alloy, 2022년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2022-04
  • Microstructural evolution of quaternary CrFeNiCu based high entropy alloys by the addition of specific Al and Ti minor elements, 2022년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2022-04
  • Magnetron sputtering 공정을 이용한 AlCoCrNi High-entropy 합금 코팅의 Crack 형성에 대한 분석, 2022년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2022-04
  • AlCrFeNi 중엔트로피 합금 분말의 전기방전소결을 통한 물성 및 구조체 변화에 대한 연구, 2022년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2022-04
  • DC Magnetron Sputtering을 통한 TiCrAlNiCu 고엔트로피 코팅의 타겟, 기판온도 변화에 따른 미세조직, 기계적 물 성 변화 분석, 2022년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2022-04
  • AlCrFeNi 고엔트로피 다층 박막의 미세구조, 기계적 특성 에 대한 분석, 2022년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2022-04
  • DC Magnetron sputtering을 이용한 CuCr film의 증착 시간에 따른 코팅막의 특성 분석, 2022년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2022-04
  • Magnetron sputtering 공정을 이용한 TiZrHfNiCuFe High-entropy 합금 코팅의 미세구조, 결정구조, 기계적 물성 분석, 2021년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2021-10
  • DC 마그네트론 스퍼티링을 통한 CuCr 박막 표면 형상 거동 연구, 2021년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2021-10
  • (TiZrNiCu)100-xSnx 고엔트로피 합금의 Sn 함량에 따른 미세조직 변화와 기계적 물성에 대한 연구, 2021년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2021-10
  • 청색 병치 혼합형 컬러 합금 구현 연구 : 상용 합금을 이용한 합금 개발, 2021년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2021-10
  • Magnetron sputtering 공정을 이용한 AlCoCrNi High-entropy 합금 코팅의 미세구조, 결정구조, 기계적 물성 분석, 2021년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2021-10
  • Impact of Heat Treatment on microsturcture and Mechanical characteristics of hypoeutectic Ti(CoFeNi) Alloy, 2021년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2021-10
  • 마그네트론 스퍼터링으로 증착한 AlCrFeNi 하이엔트로피 박막의 기판온도 조절에 따른 변화분석, 2021년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2021-10
  • 고연성 CoCuFeNi 합금의 Al 및 Si 첨가에 따른 상, 미세구조 변화 및 기계적 물성 변화에 대한 연구, 2021년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2021-10
  • Influence of Ti on the microstructure and mechanical characteristics of (CrFeNiCu)100-xTix high entropy alloys, 2021년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2021-10
  • Microstructural evolution of quaternary AlCrFeNi based high entropy alloys by the addition of specific minor elements and its effect on mechanical characteristics, 2021년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2021-04
  • Reactive magnetron sputtering 공정을 이용한 High-entropy 합금 질 화물 코팅의 미세구조, 결정구조, 기계적 물성 분석, 2021년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2021-04
  • 미세조직 변화에 따른 AlCoCrNiMn 고엔트로피 합금의 이중항복과 변 형거동의 분석, 2021년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2021-04
  • 3D 프린팅 기술로 제조된 AlCrFeNi 중엔트로피 합금의 상 및 미세조 직, 기계적 물성 분석, 2021년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2021-04
  • 공정 조건 제어에 따른 CuCr 박막 특성 거동 연구, 2021년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2021-04
  • ADC12와 AZ91을 이용한 병치 혼합형 청색 Al-Mg-Si 합금 구현 연구, 2021년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2021-04
  • 구리의 고용도를 이용한 색 변화 연구, 2021년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2021-04
  • Investigation of eutectic structure in Ti(CoFeNi) alloys and it’s mechanical characteristics., 2021년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2021-04
  • Influence of Ti on the microstructure and mechanical characteristics of (CrFeNiCu)100-xTix high entropy alloys, 2021년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2021-04
  • 상용합금을 이용한 청색 Al-Mg-Si 병치 혼합형 컬러 합금 구현 연구, 2021년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2021-04
  • CoCuFeNi 중엔트로피 합금의 Zr 첨가에 따른 상 및 미세구조, 변형 거 동 분석, 2021년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2021-04
  • 마그네트론 스퍼터링 공정을 활용한 AlCrFeNi 하이엔트로피 박막의 타 겟 제조 방법 변화에 따른 영향 분석, 2021년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2021-04
  • Effect of Al on the microstructure and mechanical characteristics of (CrFeNiCu)100-xAlx high entropy alloys, 2021년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2021-04
  • 합금설계 기법을 이용한 금속간 화합물 기반 자체색상 알루미늄 컬러 합금 구현 연구, 2020년도 대한금속재료학회 추계학술대회(댜한금속재료학회), 2020-10
  • Impact of Co and Fe Substitutions on Microstructural Evolution and Mechanical Characteristics of Quaternary Equiatomic High-Entropy Alloys, 2020년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2020-10
  • Effect of Microstructural Evolution on Mechanical Properties of (CrFeNiCu)x+Ti100-x High Entropy Alloys, 2020년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2020-10
  • Effect of In and Sn on Microstructure and Mechanical Properties of Titanium and Iron Based Ultrafine-Eutectic Alloy, 2020년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2020-10
  • 상용합금을 이용한 금속간화합물의 합금설계를 통한 청색 컬러 합금 개발, 2020년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2020-10
  • 삼원 공정 고엔트로피 합금의 열-물리적 인자를 통한 미세조직 및 기계 적 특성 연구, 2020년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2020-10
  • Heat treatment and the subsequent aging process effects on the microstructure and mechanical properties of the Ti-4.5Al-1.5Fe1.5Mn-0.18O alloy, 2020년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2020-10
  • 마그네트론 스퍼터링을 활용한 AlCrFeNi 하이엔트로피 코팅의 물성 및공정조건 최적화 , 2020년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2020-10
  • Magnetron Sputtering 공정을 이용한 Ti-Zr-Hf-Ni-Cu-Co Highentropy 합금 코팅의 인가 저력과 가스 유량 변수에 따른 기계적 물성 변화, 2020년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2020-10
  • AlCoCrNiMn 고엔트로피 합금의 미세조직 변화에 따른 기계적 특성 분석, 2020년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2020-10
  • 구리 합금의 첨가원소를 이용한 고용도 제어 색상 구현 연구, 2020년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2020-10
  • 상용합금 ADC12와 AZ91을 이용한 청색 유색합금 구현 연구, 2020년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2020-10
  • 열-물리적 인자를 통한 삼원 공정 고엔트로피 합금의 미세 조직 및 기계적 특성 연구, 2020년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2020-10
  • 고엔트로피 합금의 원자반지름 차이에 따른 상 및 기계적물성 분석, 2020년도 대한금속재료학회 추계학술대회(대한금속재료학회), 2020-10
  • 금속 합금화를 통한 새로운 색 구현 방법, 2019 한국색채학회 가을학술발표대회((사)한국색채학회), 2019-12
  • Non-equiatomic AlCrFeNi 하이엔트로피 합금 개발 및 냉각속도에 따른 기계적 특성 분석, 2019년도 한국재료학회 추계학술대회((사)한국재료학회), 2019-10
  • Optimization of microstructure and mechanical properties of MoSiN coatings by reactive magnetron sputtering process condition control, MS&T 2019(The American Ceramic Society), 2019-10
  • Chemical Evolution Influenced on Strength of Quaternary dual-phase High-Entropy Alloy, 2019년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2019-10
  • Influence of Heat Treatment on the Micro Structure and Mechanical Properties of the Ti-4.5Al-1.5Fe-1.5Mn-0.18O Alloy, 2019년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2019-10
  • Cooling Rate Effect on Microstructure and Mechanical Properties of AlCrFeNi High Entropy Alloys, 2019년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2019-10
  • Effects of Gas Flow Ratio and Working Pressure on Amorphous Mo-Si-N Coating by Magnetron Sputtering, 2019년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2019-10
  • 자체 색상제어 Al-Mg-Si 블루 컬러 합금 개발, 2019년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2019-10
  • 삼원 공정 고엔트로피 합금 설계 및 미세조직에 따른 기계적 특성 분석, 2019년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2019-10
  • Magnetron Sputtering 공정을 이용한 High-entropy 합금 코팅의 미세조직 및 기계적 물성 최적화, 2019년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2019-10
  • 물분해 광전극용 Ti 합금 설계 기반 산화물 나노 구조체 제어 기술 개발, 2019년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2019-10
  • 금속의 고용 및 상 석출 제어를 이용한 자체 색상 컬러 합금 개발 연구, 2019년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2019-10
  • Mg2Si 금속간 화합물의 부피 분율을 조절을 이용한 Al-Mg-Si 청색 합금 연구, 2019년도 한국재료학회 추계학술대회((사)한국재료학회), 2019-10
  • 합금화를 통한 자체 색상 구현 컬러 합금 개발 연구, 2019년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2019-10
  • Phase Stability and Its Relationship with Mechanical Properties on Near/Metastable β-type Ti-Cr-(Mn) Cast Alloys, 2019년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2019-10
  • Viscous flow and thermoplastic deformation behaviors of metallic supercooled liquids containing solid particles, EUROMAT 2019(FEDERATION OF EUROPEAN MATERIALS SOCIETIES), 2019-09
  • Evaluation in microstructure and mechanical properties of AlCrFeNi High-entropy alloy coatings fabricated by magnetron sputtering system, EUROMAT 2019(FEDERATION OF EUROPEAN MATERIALS SOCIETIES), 2019-09
  • Study of Microstructure and Mechanical Properties of Ni-rich (AINi2)70-xCo30Crx Alloys, EUROMAT 2019(FEDERATION OF EUROPEAN MATERIALS SOCIETIES), 2019-09
  • Study of Al-Mg-Si blue color alloy by controlling volume fraction of Mg2Si intermetallic compound, EUROMAT 2019(FEDERATION OF EUROPEAN MATERIALS SOCIETIES), 2019-09
  • Encapsulation of a Gradient Metal Oxide Layer on Porous Al-Cu-Si Alloy via Two-step Hybrid Processes, EUROMAT 2019(FEDERATION OF EUROPEAN MATERIALS SOCIETIES), 2019-09
  • Investigation of influence of B2/L21 Hierarchical Precipitate Structure on Creep Resistance of a Fe-Ni-Al-Cr-Ti Superalloy via Thermal Treatments, EUROMAT 2019(FEDERATION OF EUROPEAN MATERIALS SOCIETIES), 2019-09
  • 금속간 화합물을 이용한 금속 색상구현에 관한 연구, 2019 한국색채학회 정기총회 및 봄학술발표대회((사)한국색채학회), 2019-05
  • Ni-rich (AlNi2)70-xCo30Crx 합금 개발과 미세조직 및 기계적 특성 분석, 2019년도 한국재료학회 춘계학술대회((사)한국재료학회), 2019-05
  • Ti-Cr-Mn 합금에서 Cr과 Mn 첨가와 함량에 따른 미세조직 관찰 및 기계적 물성 변화, 2019년도 한국재료학회 춘계학술대회((사)한국재료학회), 2019-05
  • 혼합열 계산을 통한 공정 하이엔트로피 합금 설계 및 미세조직에 따른 기계적 특성 분석, 2019년도 한국재료학회 춘계학술대회((사)한국재료학회), 2019-05
  • Microstructure and Mechanical Properties of Light Weight Quaternary High-Entropy Alloy, 2019년도 대한금속재료학회 춘계학술대회((사)대한금속·재료학회), 2019-04
  • 전략적 원소 선택으로 설계된 Ti계의 기능성 산화물 특성 평가, 2019년도 대한금속재료학회 춘계학술대회((사)대한금속·재료학회), 2019-04
  • 반응성 마그네트론 스퍼터링 공정변수 제어를 통한 MoSiN 코팅의 미세조직 및 기계적 물성 최적화, 2019년도 대한금속재료학회 춘계학술대회((사)대한금속·재료학회), 2019-04
  • AlCoCrNi 하이엔트로피 합금의 미세조직에서 기인한 Ni-rich (AlNi2)70-xCo30Crx 합금 개발 및 기계적 특성 분석, 2019년도 대한금속재료학회 춘계학술대회((사)대한금속·재료학회), 2019-04
  • 자체 색상을 지니는 금속간 화합물의 석출/정출 제어를 활용한 Al-계 컬러 합금 설계 기술 개발, 2019년도 대한금속재료학회 춘계학술대회((사)대한금속·재료학회), 2019-04
  • (Mo100-XSiX)N 코팅층의 조성 및 질화에 따른 기계적 특성 및 미세조직 평가, 2019년도 대한금속재료학회 춘계학술대회((사)대한금속·재료학회), 2019-04
  • Al-Mg-Si 블루 컬러 합금의 미소원소 첨가에 따른 기계적 물성 및 색도 변화 연구, 2019년도 대한금속재료학회 춘계학술대회((사)대한금속·재료학회), 2019-04
  • Study of Cooling Rate and Mechanical Properties of Ni-Rich AlCoCrNi High Entropy Alloys, 2019년도 대한금속재료학회 춘계학술대회((사)대한금속·재료학회), 2019-04
  • 혼합열 계산을 통한 공정 하이엔트로피 합금 설계 및 합금의 기계적 특성 분석, 2019년도 대한금속재료학회 춘계학술대회((사)대한금속·재료학회), 2019-04
  • Microstructural Evolution and mechanical properties of quaternary AlCrFeNi High Entropy Alloy, TMS2019 148th annual meeting & exhibition(TMS), 2019-03
  • 반응성 물리증착법을 이용한 MoSiN코팅의 미세조직 및 기계적특성 평가, 2019년도 한국재료조직학회((사)한국재료조직학회), 2019-01
  • Study of microstructure and mechanical properties of AlCoCrNi high entropy alloys, 2019년도 한국재료조직학회((사)한국재료조직학회), 2019-01
  • Mg2Si 금속간 화합물을 이용한 Al-Mg-Si 합금의 색도 및 물성 변화 연구, 2019년도 한국재료조직학회((사)한국재료조직학회), 2019-01
  • Influence of spherical particles and interfacial stress distribution on viscous flow behavior of Ti-Cu-Ni-Zr-Sn bulk metallic glass composites, 2019년도 한국재료조직학회((사)한국재료조직학회), 2019-01
  • Microstructural Evolution and Mechanical Properties of Quaternary AlCoCrNi High Entropy Alloy, The 2nd International Conference on High-Entropy Materials(The Korean Institute of Metals and Materials), 2018-12
  • Microstructural Evolution of AlCoCrNi and AlCrFeNi High-Entropy Alloys, The 2nd International Conference on High-Entropy Materials(The Korean Institute of Metals and Materials), 2018-12
  • Study of mechanical properties and deformation behavior of AlCoCrNi high entropy alloys, The 2nd International Conference on High-Entropy Materials(The Korean Institute of Metals and Materials), 2018-12
  • Influence of nitride addition on phase transition and mechanical properties of TiZrHfNiCuCo multicomponent film, The 2nd International Conference on High-Entropy Materials(The Korean Institute of Metals and Materials), 2018-12
  • 물리증착법을 이용한 AlCoCrNi 하이엔트로피 합금 코팅의 미세조직 및 기계적특성 평가, 2018 한국분말야금학회 정기총회 및 추계학술 강연 (한국분말야금학회), 2018-11
  • Formation of High Entropy Film For Cutting Tool By Magnetron Sputtering, AVS 65th International Symposium & Exhibition(American Vacuum Society), 2018-10
  • 반응성 마그네트론 스퍼터링 공정을 이용한 MoSi합금 코팅의 미세조직 및 기계적 특성 평가, 2018년도 대한금속재료학회 추계학술대회 ((사)대한금속·재료학회), 2018-10
  • Investigation on Mechanical, Deformation and Fracture Behaviors of Bulk Metallic Glass Composites Reinforced by Spherical B2 Particles, 2018년도 대한금속재료학회 추계학술대회 ((사)대한금속·재료학회), 2018-10
  • Al-Mg-Si 블루 컬러합금의 금속간 화합물 분율 및 분포도에 따른 색도 및 물성 변화 연구, 2018년도 대한금속재료학회 추계학술대회 ((사)대한금속·재료학회), 2018-10
  • Ti-Cr-Mn합금의 첨가원소 및 열처리 조건에 의한 미세조직과 기계적 물성 관찰, 2018년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2018-10
  • Chemical Evolution-Induced Strengthening on AlCoCrNi Dual-Phase High-Entropy Alloy with High Specific Strength, 2018년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2018-10
  • Effect of The Addition of N2 on The Structural and Mechanical Properties of TiZrHfNiCuCo High Entropy Alloy Films, 2018년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2018-10
  • AlCoCrNi 하이엔트로피 합금의 Nano Separation에서 유래된 Cr-Co Based 합금 개발 및 기계적 특성 분석, 2018년도 대한금속재료학회 추계학술대회 ((사)대한금속·재료학회), 2018-10
  • Development of New Color Materialization in Metallic Materials Based on the Controlling Transition Energy, 2018년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2018-10
  • Cu100-x(AlNi)x 합금에서 청색 AlNi 석출 제어에 따른 기계적 물성 및 색 변화 상관성 고찰, 2018년도 대한금속재료학회 추계학술대회((사)대한금속·재료학회), 2018-10
  • Investigation on the relationship of the microstructure and mechanical properties by Mn addition in the Ti-Cr-Mn alloys, 25th INTERNATIONAL SYMPOSIUM ON METASTABLE, AMORPHOUS AND NANOSTRUCTURED MATERIALS(ISMANAM 2018), 2018-07
  • Study of colour and mechanical property by transition of Mg2Si to Si phase distribution and ratio of Al-based blue colour alloy, 25th INTERNATIONAL SYMPOSIUM ON METASTABLE, AMORPHOUS AND NANOSTRUCTURED MATERIALS(ISMANAM 2018), 2018-07
  • Effect of Nb on microstructure and mechanical properties of Ti-based ultrafine eutectic composites, 25th INTERNATIONAL SYMPOSIUM ON METASTABLE, AMORPHOUS AND NANOSTRUCTURED MATERIALS(ISMANAM 2018), 2018-07
  • Investigation of the effect of hot rolling process on the microstructure and mechanical properties of Cu-Mn alloys, 25th INTERNATIONAL SYMPOSIUM ON METASTABLE, AMORPHOUS AND NANOSTRUCTURED MATERIALS(ISMANAM 2018), 2018-07
  • Surface functionalization on porous Al88Cu6Si6 alloy via two-step hybrid processes, 25th INTERNATIONAL SYMPOSIUM ON METASTABLE, AMORPHOUS AND NANOSTRUCTURED MATERIALS(ISMANAM 2018), 2018-07
  • Understanding correlation between mechanical property and color change of Cu100-x(AlNi)x alloys , 25th INTERNATIONAL SYMPOSIUM ON METASTABLE, AMORPHOUS AND NANOSTRUCTURED MATERIALS(ISMANAM 2018), 2018-07
  • The microevolution of mechanical properties and microstructure in Fe-based high strength alloys with addition of immiscible elements, 25th INTERNATIONAL SYMPOSIUM ON METASTABLE, AMORPHOUS AND NANOSTRUCTURED MATERIALS(ISMANAM 2018), 2018-07
  • Viscous flow and deformation behaviors on supercooled liquid region of Ti-based bulk metallic glass composites containing spherical B2 particles, 25th INTERNATIONAL SYMPOSIUM ON METASTABLE, AMORPHOUS AND NANOSTRUCTURED MATERIALS(ISMANAM 2018), 2018-07
  • Development of High Entropy Alloy Film using Magnetron Sputtering, 2018년도 한국표면공학회 춘계학술대회 국제표면처리 워크샵 및 특별 강습회(한국표면공학회), 2018-06
  • Development of Gd-Co-based amorphous and nanocrystalline alloys used as magnetic refrigeration materials, The 5th International Conference of Asian Union of Magnetcis Societies(한국자기학회 등), 2018-06
  • AlCr계 절삭공구 코팅의 미세조직 및 우수한 기계적 물성 분석, 2018년도 한국표면공학회 춘계학술대회 국제표면처리 워크샵 및 특별 강습회(한국표면공학회), 2018-06
  • Study of molecular dynamics analysis of atomic-level structure properties with thermal effects of metallic glasses, The 12th International Conference on Bulk Metallic Glasses(Seoul National University), 2018-05
  • Viscous flow and thermoplastic deformation behavior of Ti-based bulk metallic glass composites, The 12th International Conference on Bulk Metallic Glasses(Seoul National University), 2018-05
  • Formation of nano-oxides on porous metallic glass compacts using hydrothermal synthesis, The 12th International Conference on Bulk Metallic Glasses(Seoul National University), 2018-05
  • Designing of excellent mechanical properties and paramagnetic of Ferro-based high entropy metallic glasses, The 12th International Conference on Bulk Metallic Glasses(Seoul National University), 2018-05
  • Evaluation on crystallization behavior and phase transformation of TiCu-based BMG , The 12th International Conference on Bulk Metallic Glasses(Seoul National University), 2018-05
  • Development of functionalized metallic glasses, The 12th International Conference on Bulk Metallic Glasses(Seoul National University), 2018-05
  • 유사원소치환법을 이용한 하이엔트로피 합금 개발 및 특성 평가, 2018년도 한국재료학회 춘계학술대회(한국재료학회), 2018-05
  • Al-계 컬러 합금의 청색 금속간 화합물 분포 및 분율에 따륜 색도 및 물성 변화 연구, 2018년도 한국재료학회 춘계학술대회(한국재료학회), 2018-05
  • Ti-Cr-Mn 합금에서 Mn 첨가량에 따른 미세조직과 기계적 물성의 변화 및 상관관계, 2018년도 한국재료학회 춘계학술대회(한국재료학회), 2018-05
  • Influence of spherical particles and interfacial stress distribution on viscous flow behavior of Ti-Cu-Ni-Zr-Sn bulk metallic glass composites, 2018년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2018-04
  • 물리증착법(PVD)으로 Ti-계 비정질 합금과 Al-계 합금의 다층구조형성을 통한 기계적 물성 최적화, 2018한국분말야금학회 춘계학술강연 및 발표대회((사)한국분말야금학회), 2018-04
  • Enhancement of mechanical properties in Fe based high strength alloys by addition of minor alloying elements, 2018년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2018-04
  • 수열합성 공정을 통한 Al88Cu6Si6 공정 합금의 표면 특성 부여, 2018년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2018-04
  • AlCrN based Hard Coating의 미세구조 및 기계적 특성 분석, 2018년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2018-04
  • D.C. 마그네트론 스퍼티링 공정을 이용한 하이엔트로피합금 코팅소재의 미세조직 및 기계적 특성평가, 2018년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2018-04
  • AlCoCrNi 합금의 개발 및 미세조직 변화에 따른 기계적 특성 분석, 2018년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2018-04
  • Nano-Scale Micro-structural Evolution and Mechanical Properties of Quaternary AlCoCrNi High Entropy Alloy, 2018년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2018-04
  • 첨가 원소 및 열처리에 의한 Ti-Cr-X합금의 미세조직 및 기계적 물성 거동, 2018년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2018-04
  • Mn 함량에 따른 Cu-Mn 합금의 열간압연 미세조직 및 기계적 특성 연구, 2018년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2018-04
  • Al-계 블루 컬러 합금의 Mg2Si상 분율 및 분포도에 따른 색도 및 물성 변화 연구, 2018년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2018-04
  • 청색 AlNi 석출 제어를 통한 Cu100-x(AlNi)x 합금의 기계적 물성과 색 변화 연관성 연구, 2018년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2018-04
  • Effect of anneling on microstructure and mechanical properties of equatomic AlCoCrNi high-entropy alloy, 2018년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2018-04
  • Brilliant 컬러 합금 개발, 2018년도 대한금속재료학회 춘계학술대회(대한금속재료학회), 2018-04
  • Effects of Additional Elements on the Microstructure and Mechanical Properties of High Entropy Alloys Based on TiZrHfNiCu System, TMS 2018 147th annual meeting & exhibition(TMS ), 2018-03
  • Development of High Entropy Alloy Coating Layer Using DC Magnetron Sputtering, TMS 2018 147th annual meeting & exhibition(TMS ), 2018-03
  • Hard coating 소재적용을 위한 하이엔트로피 합금개발, 2017 한국재료학회 추계학술대회((사)한국재료학회), 2017-11
  • Characteristic on Nanostructured Multicomponent Coating Layer Using Direct Current Sputtering, Materials Science & Technology 2017(ACS 등), 2017-10
  • Effects of Elemental Interaction on Microstucture and Mechanical Property of Multicomponent TiZrHiNiCuM(M=Co,Fe) High Entropy Alloy System, Materials Science&Technology 2017(ACS 등), 2017-10
  • Microstructure and Mechanical Properties of AlCoCrNi High Entropy Alloy, Materials Science & Technology 2017(ACS 등), 2017-10
  • Nano-scale Microstructural Evolution and Mechanical Properties of Equiatomic AlCoCrNi High-Entropy Alloy, 2017 추계대한금속재료학회((사)대한금속·재료학회), 2017-10
  • 제 3원소 첨가에 따른 Cu-Mn계 합금의 미세조직 및 기계적 특성 연구, 2017 추계대한금속재료학회((사)대한금속·재료학회), 2017-10
  • Study of Molecular Dynamics Analysis of Atomic-level Structure Properties with Voronoi Diagram in Metallic Glasses, 2017 추계대한금속재료학회((사)대한금속·재료학회), 2017-10
  • 자기냉매 개발을 위한 Gd-Co-계 비정질 합금 설계와 나노결정화에 따른 자기열량효과 비교, 2017 추계대한금속재료학회((사)대한금속·재료학회), 2017-10
  • Ti-Cr-X 합금에서 첨가원소 X에 따른 변형기구 및 기계적 물성의 거동, 2017 추계대한금속재료학회((사)대한금속·재료학회), 2017-10
  • 미량원소 첨가에 따른 Ti65Fe35 과공정 합금의 미세구조와 기계적 특성의 변화, 2017 추계대한금속재료학회((사)대한금속·재료학회), 2017-10
  • Influence of the atomic ratio between Zr and Ti content on the Ni-Cu-Zr-Ti-Si-Sn bulk metallic glasses, 2017 추계대한금속재료학회((사)대한금속·재료학회), 2017-10
  • Ti-계 비정질 합금이 물리증착법으로 형성한 Al-계 하드코팅의 미세조직에 미치는 영향, 2017 추계대한금속재료학회((사)대한금속·재료학회), 2017-10
  • 미소 원소 첨가에 따른 구리 합금의 전자 구조 변화 및 색 변화 상관성 고찰, 2017 추계대한금속재료학회((사)대한금속·재료학회), 2017-10
  • Cu100-x(AlNi)x 합금의 기계적 물성과 색 변화 연관성 연구, 2017 추계대한금속재료학회((사)대한금속·재료학회), 2017-10
  • Influence of spherical particles and interfacial stress distribution on viscous flow behavior of Ti-Cu-Ni-Zr-Sn bulk metallic glass composites, 2017 추계대한금속재료학회((사)대한금속·재료학회), 2017-10
  • Optimization of Ti-based coating layer with various deposition time by Physical Vapor Deposition time by Physical Vapor Deposition, The 11th Asian-European International Conference on Plasma Surface Engineering(한국진공학회), 2017-09
  • Evaluation on of microstructure and mechanical properties multicomponent film by DC magnetron sputtering, The 11th Asian-European International Conference on Plasma Surface Engineering(한국진공학회 등), 2017-09
  • Surface functionalization on porous metallic glass compacts via hydrothermal synthesis, The 11th Asian-European International Conference on Plasma Surface Engineering(한국진공학회), 2017-09
  • Gradual martensitic transformation of B2 particle on TiCu-based bulk metallic glass omposite during initial deformation stage, 한국재료조직학회((사)한국재료조직학회), 2017-08
  • Effect of additional element on microstructure and mechanical properties of high entropy alloys based on AlCrTiMo , 한국재료조직학회((사)한국재료조직학회), 2017-08
  • TiZrHfNiCuM high-entropy alloy system, 한국재료조직학회((사)한국재료조직학회), 2017-08
  • Optimization of Ti-based coating layer as various deposition time with PVD method, The 16th International Conference on Rapidly Quenched & Metastable Materials(Montan Universitat), 2017-08
  • Study on the microstructure and mechanical properties of equi-atomic substituted high-entropy alloys, The 16th International Conference on Rapidly Quenched & Metastable Materials(Montan Universitat), 2017-08
  • Effects of minor elements on transition energy and color change of Cu-M alloys, The 16th International Conference on Rapidly Quenched & Metastable Materials(Montan Universitat), 2017-08
  • Investigation of (Ti65Fe35)100-x(Bi53In47)x hypereutectic alloys with β-Ti dendrite, The 16th International Conference on Rapidly Quenched & Metastable Materials(Montan Universitat), 2017-08
  • Effect of additional element on microstructure and mechanical properties of Ti-based ultrafine eutectic alloy, The 16th International Conference on Rapidly Quenched & Metastable Materials(Montan Universitat), 2017-08
  • Investigation on Gd-based metallic glass alloys for magnetic refrigerant development, The 16th International Conference on Rapidly Quenched & Metastable Materials(Montan Universitat), 2017-08
  • Martensitic transformation behavior related with work-hardening on initial deformation stage of Ti-based bulk metallic glass composite, The 16th International Conference on Rapidly Quenched & Metastable Materials(Montan Universitat), 2017-08
  • Investigation color difference of Cu-x alloys with the various composition, 2017 춘계대한금속재료학회((사)대한금속·재료학회), 2017-04
  • Crystallization and phase transformation behavior of TiCu-based bulk metallic glass composite with B2 particles, 2017 춘계대한금속재료학회((사)대한금속·재료학회), 2017-04
  • Enhancement of mechanical properties of Cu – Mn – X shunt alloys by second phase dispersion strengthening with positive heat of mixing, 2017 춘계대한금속재료학회((사)대한금속·재료학회), 2017-04
  • Microstructure and mechanical properties of AlCoCrNi High entropy alloy, 2017 춘계대한금속재료학회((사)대한금속·재료학회), 2017-04
  • Optimization of coating layer with various layer combination by Physical Vapor Deposition, 2017 춘계대한금속재료학회((사)대한금속·재료학회), 2017-04
  • Study on microstructure and mechanical properties of nanostructured nitride coating layer by reactive DC sputtering, 2017 춘계대한금속재료학회((사)대한금속·재료학회), 2017-04
  • Investigation correlation between transition energy and color difference of Cu-X color metal alloy, 2017 춘계대한금속재료학회((사)대한금속·재료학회), 2017-04
  • Influence of minor elements on microstructure and mechanical properties of Ti-Cr-X alloys, 2017 춘계대한금속재료학회((사)대한금속·재료학회), 2017-04
  • Investigation on Gd-based metallic glass alloys for magnetic refrigerant development, 2017 춘계대한금속재료학회((사)대한금속·재료학회), 2017-04
  • Mn, V 첨가에 따른 AlCoCrNi 합금의 미세조직 및 기계적 특성 평가, 2017 한국분말야금학회 춘계학술대회(㈜한국분말야금학회), 2017-04
  • Surface functionalization on porous metallic glass compacts via hydrothermal synthesis, 2017 한국분말야금학회 춘계학술대회(㈜한국분말야금학회), 2017-04
  • Optimization the mechanical properties of Ti-based alloy coating layer as deposition time by PVD, 2017 한국분말야금학회 춘계학술대회(㈜한국분말야금학회), 2017-04
  • Fabrication and characterization of novel Al/Al clad composite with high strength and aesthetic exterior design, 2017 춘계대한금속재료학회((사)대한금속·재료학회), 2017-04
  • Investigation of the evolution on microstructures and mechanical properties of Al-based Eutectic Alloy by liquid separation, 2017 춘계대한금속재료학회((사)대한금속·재료학회), 2017-04
  • The effects of elemental interaction on microstructure and mechanical behavior of multicomponent TiZrHfNiCuX high entropy alloy system, 2017 춘계대한금속재료학회((사)대한금속·재료학회), 2017-04
  • 밴드-간 에너지 변화에 따른 Cu-X 유색 합금의 색 변화 상관성 분석, 2017 춘계대한금속재료학회((사)대한금속·재료학회), 2017-04
  • Influence of Vanadium on Microstructure and Mechanical Properties of High Entropy Alloy Based on AlCrMoTi System, International Conference on High-Entropy Materials 2016(TMS 등), 2016-11
  • Effects of Mn and V on Microstructure and Mechanical Properties of AlCoCrNi High Entropy Alloy, International Conference on High-Entropy Materials 2016(TMS 등), 2016-11
  • Phase Evolution, Microstructure and Mechanical Properties of High Entropy Alloys Developed by Equiatomic Substitution, International Conference on High-Entropy Materials 2016(TMS 등), 2016-11
  • 선택적 첨가원소에 따른 하이엔트로피 합금의 기계적 특성 및 미세조직 변화 연구, 2016년도 대한금속재료학회 추계학술대회((사)대한금속재료학회), 2016-10
  • Microstructure and Properties of TiN Coating Layer on Tool Materials, Materials Science & Technology 2016(ACS, TMS등), 2016-10
  • Investigation of (Ti65Fe35)100-x(Bi53In47)x hypereutectic alloys with β-Ti dendrite, 2016년도 대한금속재료학회 추계학술대회((사)대한금속재료학회), 2016-10
  • Optimization of Ti-based Alloy Coating Layer by Deposition Time Using Physical Vapor Deposition, 2016년도 대한금속재료학회 추계학술대회((사)대한금속재료학회), 2016-10
  • Effects of Additional Elements on the Microstructure and Mechanical Properties of High Entropy Alloys Developed by Equiatomic Substitution, 2016년도 대한금속재료학회 추계학술대회((사)대한금속재료학회), 2016-10
  • Effects of Mn and V on Microstructure and Mechanical Properties of High Entropy Alloys Based on AlCoCrNi System, 2016년도 대한금속재료학회 추계학술대회((사)대한금속재료학회), 2016-10
  • 반응성 물리증착 공정을 이용한 고강도 코팅소재 개발 연구, 2016년도 대한금속재료학회 추계학술대회((사)대한금속재료학회), 2016-10
  • Investigation of Microstructure and Mechanical Properties of Cu-xFe Alloys with the Different Cooling Rate, 2016년도 대한금속재료학회 추계학술대회((사)대한금속재료학회), 2016-10
  • Gd계 비정질 합금의 형성능에 미소첨가 원소가 미치는 영향, 2016년도 대한금속재료학회 추계학술대회((사)대한금속재료학회), 2016-10
  • 구리계 유색금속의 주석/아연 첨가에 따른 미세조직 변화와 색 변화 연관성 연구, 2016년도 대한금속재료학회 추계학술대회((사)대한금속재료학회), 2016-10
  • Effect of Aluminium on microstructure and mechanical properties of ultralight Mg-(5,8,15)Li alloys, ISMANAM 2016(Tohoku University 등), 2016-07
  • Investigation of microstructure and mechanical properties of Copper-Ferro alloys with minor elements, ISMANAM 2016(ISMANAM), 2016-07
  • Plastic Deformation Behavior of Fe-Co-B-Si-Nb-Cr Bulk Metallic Glasses Under Nanoindentaion, 11th International Conference on Bulk Metallic Glasses(Washington University), 2016-06
  • Gradual Martensitic Transformation of B2 phase on TiCu-based Bulk Metallic Glass Composite during Deformation, 11th International Conference on Bulk Metallic Glasses(Washington University), 2016-06
  • Martensitic transformation process of spherical B2 particle on early deformation stage of TiCu-based bulk metallic glass composite, 2016년도 한국재료학회 춘계학술대회(한국재료학회), 2016-05
  • Development of Co-based metallic glasses with Superior Mechanical properties usinghigh-entropy alloy concept, 2016년도 한국재료학회 춘계학술대회(한국재료학회), 2016-05
  • Crystallization Kinetics and Thermo-mechanical Behavior on Supercooled Liquid Region of Ti-Cu-Ni-Zr-Sn-Si Bulk Metallic Glass, 2016년도 한국재료학회 춘계학술대회(한국재료학회), 2016-05
  • Effect of Nb on Microstructure & Mechanical properties of Ti-based eutectic alloy, 2016년도 한국재료학회 춘계학술대회(한국재료학회), 2016-05
  • Interpretation of macroscopic mechanical properties in Fe-Nb-B composite alloys utilizing systematic nano-scale analysis, 2016년도 한국재료학회 춘계학술대회(한국재료학회), 2016-05
  • Crystallization behavior of Ti45Cu40Ni7.5Zr4Sn2.5Si1 bulk metallic glass composite, 2016년도 한국재료학회 춘계학술대회(한국재료학회), 2016-05
  • 첨가원소에 따른 Mg-(5-15)Li 초경량 합금의 미세구조 및 기계적 특성, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Effect of the Atomic Ratio Between Zr and Ti Content on the Ni-Cu-Zr-Ti-Si-Sn Bulk Metallic Glasses, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Application of Eutectic Alloys and Silicon-carbide Composites for Radiation Shielding, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Effect of the Minor Elements on the Microstructure and Mechanical Properties in (Cu-30Fe)-2X Alloys with (X=Si, Nb, V, Cr, Mg, Ag), 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Effects of Mn and V on Microstructure and Mechanical Properties of High Entropy Alloys Based on AlCoCrNi System, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Investigation of Microstructure and Mechanical Properties of Liquid-separated Al-based Trimodal Eutectic Alloys, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Crystallization Kinetics and Thermo-mechanical Behavior on Supercooled Liquid Region of Ti-Cu-Ni-Zr-Sn-Si Bulk Metallic Glass, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Deformation Mechanisms to Ameliorate the Mechanical Properties of Co-Cr-Mo-(Cu) Ultrafine Eutectic Alloys, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Development of Ti-based Eutectic Alloy with Remarkable Mechanical Properties, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Effect of Additional Elements on the Microstructure and Mechanical Properties of Equi-atomic Substituted TiZrHfNiCu and TiZrHfNiCuM(M=Co, Nb) High-entropy Alloys, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • 첨가원소의 영향에 따른 Ti계 공정합금의 기계적물성 변화 연구, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Influence of Additional Minor Elements on Mechanical Properties in ((Fe0.9Nb0.1)0.85(B0.15))100-x(Cu, Al)x, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Influence of Different Minor Elements on the Microstructure and Mechanical Properties of Copper-Ferro Alloys, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Study of Microstructural Evolution and Mechanical Properties of Liquid-separated Al-based Eutectic Alloys, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Formation of Bimodal Eutectic Structure in (Ti70.5Fe29.5)100-x(Bi53In47)X Eutectic Alloys, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Development of Gd-Co-Si Metallic Glasses via Exploring Ternary Eutectic Composition, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Investigation of Martensitic Transformation Process of B2-spherulite on Early Work-hardening stage of TiCu-based Bulk Metallic Glass Composite, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Influence of Added Mn and V on Microstructure and Enhancement of Mechanical Properties of High Entropy Alloys Based on AlCoCrNi System, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Understanding for Mechanical Properties Through the Mechanical Mismatch of Fe-Nb-B Eutectic Alloys Using Nanoindentation Technique, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • Optimization of Ti Based Bulk Metallic Glass Coating Layer by Physical Vapor Deposition, 2016년도 대한금속재료학회 춘계학술대회((사)대한금속재료학회), 2016-04
  • 금속 다공체의 선택적 나노 산화물 성장, 2016년도 한국분말야금학회 춘계학술대회((사)한국분말야금학회), 2016-03
  • STUDY ON PROPERTIES OF SI-FE-B COMPOSITE AS AN ANODE FOR LI-ION BATTERIES, 2016 한국분말야금학회 춘계학술대회((사)한국분말야금학회), 2016-03
  • 수열합성 공정을 이용한 금속 다공체의 나노 산화물 형성 (Formation of nano-oxides on porous metallic glass compacts using hydrothermal synthesis), 한국분말야금학회, 2015-11
  • 리튬이온 전지에서 음극소애의 Si-Fe-B 합금에 대한 특성 연구 study on properties of Si-Fe-B composite as an anode for Li-ion batteries, 한국분말야금학회, 2015-11
  • 벤딩효과를 통한 Ti-계 비정질 상에 형성한 다층 코팅층연구 Investigation of the multilayered coating on Ti-based BMGs using Bending effect, 한국분말야금학회, 2015-11
  • Gradual Martensitic Transformation of B2-TiCu phase on Ti-Cu-Ni-Zr-Sn bulk metallic glass composite, 14th International Union of Materials Research SocietiesInternational Conference on Advanced Materia(14th IUMRS), 2015-10
  • Phase evolution and mechanical behavior of TiZrHfNiCuM high entropy alloys, 14th International Union of Materials Research SocietiesInternational Conference on Advanced Materia(14th IUMRS), 2015-10
  • Deformation Machanisms of High Strength Ultrafine Eutectic Alloys, 14th International Union of Materials Research SocietiesInternational Conference on Advanced Materia(14th IUMRS), 2015-10
  • Influence of Replacement Ni with Cu on Microstructure and Cycling performance of Si-Ti-Cu-Ni anode for Li-Ion Batteries, 14th International Union of Materials Research SocietiesInternational Conference on Advanced Materia(14th IUMRS), 2015-10
  • Establishment of processing optimization for the AlTiN coating layer on the tool materials, 14th International Union of Materials Research SocietiesInternational Conference on Advanced Materia(14th IUMRS), 2015-10
  • Effect of additional element on mechanical properties of Ti-based ultrafine eutectic composite, 14th International Union of Materials Research SocietiesInternational Conference on Advanced Materia(14th IUMRS), 2015-10
  • Nb첨가에 따른 Ti-Sn 극미세 공정합금의 미세조직 및 기계적특성 변화, 2015 추계대한금속재료학회(대한금속재료학회), 2015-10
  • Study on the Microstructure and Mechanical Properties of Ce-Zr alloys with the Different Cooling rate, 2015 추계대한금속재료학회(대한금속재료학회), 2015-10
  • Influence of Additional Elements on the Microstructure and Mechanical Properties of TiZrHfNiCu(Co, Nb, Fe) High-entropy Alloys, 2015 추계대한금속재료학회(대한금속재료학회), 2015-10
  • Bending Effect of the Multilayered Coating on Surface of Ti-based BMGs, 2015 추계대한금속재료학회(대한금속재료학회), 2015-10
  • Al첨가에 따른 Mg-Li 초경량 합금의 미세구조 및 기계적 특성, 2015 추계대한금속재료학회(대한금속재료학회), 2015-10
  • Improving the GFA of Ni-Cu-Zr-Ti-Si-Sn Bulk Metallic Glasses by Controlling Atomic Ratio Between Ti and Zr contents, 2015 추계대한금속재료학회(대한금속재료학회), 2015-10
  • Mechanical Properties and Microstructure of Al-(CoFeNi) System Alloy, 2015 추계대한금속재료학회(대한금속재료학회), 2015-10
  • Influence of Zr Content on Phase Transition and Mechanical Behavior of Ni-Ti-Hf-Zr Shape Memory Alloys, 2015 추계대한금속재료학회(대한금속재료학회), 2015-10
  • Investigation of Mechanical Properties and Deformation Behavior of Co-Cr-Mo-(Cu) Eutectic Alloy, 2015 추계대한금속재료학회(대한금속재료학회), 2015-10
  • Outstanding Cycle Performance of Si-Fe-B Composite as an Anode for Li-Ion Batteries, 2015 추계대한금속재료학회(대한금속재료학회), 2015-10
  • Effect of Minor Element on the Microstructural Evolution, Mechanical Properties and Deformation Behavior of AlBased Alloy, 2015 추계대한금속재료학회(대한금속재료학회), 2015-10
  • Effect of Minor Element on the Microstructural Evolution, Mechanical Properties and Deformation Behavior of AlBased Alloy, 2015 추계대한금속재료학회(대한금속재료학회), 2015-10
  • Microstructural investigation of TiZrHfNiCu high entropy alloys, 12th Multinational Congress on Microscopy(European Microscopy Society ), 2015-08
  • Influence of small amount Cu on deformation mechanism of Co-Cr-Mo ternary eutectic alloy, ISMANAM 2015, 2015-07
  • Work-hardening and plastic deformation of TiCu-based bulk metallec glass composites, ISMANAM 2015, 2015-07
  • 선택적 첨가원소에 따른 TiZrHfNiCu 하이엔트로피 합금 개발 및 특성 변화, 2015 춘계대한금속재료학회((사)대한금속·재료학회), 2015-04
  • 기계적 합금화로 제조된 Ti-Hf-Zr-Ni-Cu 하이엔트로피 합금의 미세조직 및 기계적 특성, 2015 춘계대한금속재료학회((사)대한금속·재료학회), 2015-04
  • Ti44.4Zr6.6(Cu0.8Ni0.15Sn0.05)49 벌크 비정질 복합재의 결정화거동, 2015 춘계대한금속재료학회((사)대한금속·재료학회), 2015-04
  • Al첨가에 따른 Mg-(5.10.15)Li 초경량 합금의 미세구조 및 기계적 특성, 2015 춘계대한금속재료학회((사)대한금속·재료학회), 2015-04
  • Phase Sellection of TiZrHfNiCuX High Entropy Alloys, 2015 춘계대한금속재료학회(2015년도 대한금속재료학회춘계학술대회 초록집), 2015-04
  • 고부가가치 산업 창출을 위한 유색 합금 개발, 2015 춘계대한금속재료학회(2015년도 대한금속재료학회춘계학술대회 초록집), 2015-04
  • Establishment of Control Technology for the AlTiN Coating Layer on Surface of WC, 2015 춘계대한금속재료학회((사)대한금속·재료학회), 2015-04
  • Influence of Nb on Microstructure and Mechanical properties of Ti-Sn-Nb Eutectic alloy, 2015 춘계대한금속재료학회((사)대한금속·재료학회), 2015-04
  • 음극용 Si-Ti-Cu-Ni 합금 소재의 미세조직 변화에 따른 리튬이온 전지의 특성변화, 2015 한국분말야금학회(㈜한국분말야금학회), 2015-04
  • 공구소재 상에 형성한 AlTiN 코팅층의 미세조직과 특성 연구 , 2015 한국분말야금학회(㈜한국분말야금학회), 2015-04
  • Effect of Small Amount Cu Addition on Mechanical Properties of Co-Cr-Mo Ternary Eutectic Alloy, 2015 춘계대한금속재료학회((사)대한금속·재료학회), 2015-04
  • Relationship Between Phase Transition and Mechanical Behavior of Ni-Ti-Hf-Zr Shape Memory Alloys, 2015 춘계대한금속재료학회((사)대한금속·재료학회), 2015-04
  • Investigation of the Microstructure and Mechanical Properties of Al-Cu-Fe Alloy, 2015 춘계대한금속재료학회((사)대한금속·재료학회), 2015-04
  • Effect of Cu Addition on the Glass Forming Ability of Ni-Zr-Ti-Si-Sn Bulk Metallic Glass, 2015 춘계대한금속재료학회((사)대한금속·재료학회), 2015-04
  • Gradual Martensitic Transformation of B2-TiCu phase on Ti-Cu-Ni-Zr-Sn Bulk metallic Glass Composite, 2015 춘계대한금속재료학회((사)대한금속·재료학회), 2015-04
  • Effects of Additional Elements on the Mechanical property of (Ti33Zr33Hf33)-(Ni50Cu50) High Entropy alloys, TMS2015 145th annual meeting & Exhibition (American Physical Society), 2015-03
  • Work-Hardening and Plastic Deformation Behavior of TiCu-Based Bulk Metallic Glass Composites, TMS2015 145th annual meeting & Exhibition(American Physical Society), 2015-03
  • Deformation mechanisms of high strength ultrafine eutectic alloys, China-Korea Cooperative Symposium on Advanced Materials January 20, 2015 Jinan(China-Korea Cooperation), 2015-01
  • Surface Properties of TiN and TiAlN Thin Film Layers on WC Tool Materials, Pacific Rim Symposium on Surfaces, Coatings and Interfaces 2014(AVS), 2014-12
  • WC 표면 Ti(Al)N 코팅층의 기계적 특성 연구, 2014 추계 분말야금학회(한국분말야금학회), 2014-11
  • Formation of the Ti(Al)-Nitride Coating Layer on Surface of WC, 추계 대한금속재료학회(대한금속재료학회), 2014-10
  • The Effect of Ca Addition on the Microstructure and Mechanical Properties of Sn Rich Near-equiatomic Alloys with Low Melting Temperature, 추계 대한금속재료학회(대한금속재료학회), 2014-10
  • Investigation of the Microstructure and Mechanical properties of Ti-Sn-Nb ultrafine eutectic composite, 추계 대한금속재료학회(대한금속재료학회), 2014-10
  • Effects of Additional Elements on the Mechanical Properties of (Ti33Zr33Hf33) - (Ni50Cu50) High Entropy Alloys, 추계 대한금속재료학회(대한금속재료학회), 2014-10
  • Microstructures and Nanoindentation Mapping of Mechanical Properties in Fe-Nb-B Eutectic Composite Alloys, 추계 대한금속재료학회(대한금속재료학회), 2014-10
  • Influence of Fe Addition on Microstructure and Mechanical Properties of Al-Cu Binary Eutectic Alloy, 추계 대한금속재료학회(대한금속재료학회), 2014-10
  • Designing of High Hardness and Modulus Cobalt-based Metallic Glasses for Reducing Cobalt Contents using High-entropy Alloy Concept, 추계 대한금속재료학회(대한금속재료학회), 2014-10
  • Work-hardening and Plastic Deformation Behavior of TiCu-based Bulk Metallic Glass Composites, 추계 대한금속재료학회(대한금속재료학회), 2014-10
  • Gradual Martensitic Transformation of B2-TiCu phase on Ti-Cu-Ni-Zr-Sn Bulk Metallic Glass Composite, 추계 대한금속재료학회(대한금속재료학회), 2014-10
  • MICROSTRUCTURE AND PROPERTIES OF TiN COATING LAYER ON THE SURFACE OF WC, 16 th International Conference on Thin Films 2014(ICTF16), 2014-10
  • 전기화확적 특성향상을 위한 음극용 Si-Fe-Al 신합금 개발, 추계 대한금속재료학회(대한금속재료학회), 2014-10
  • Study on the Microstructure and Mechanical Properties of High Entropy Alloys Developed by Equiatomic Substitution, 추계 대한금속재료학회(대한금속재료학회), 2014-10
  • High strength ultrafine eutectic alloys with enhanced plasticity, The 15th International Conference on Rapidly Quenched & Metastable Materials(RQ15), 2014-08
  • Influence of cooling rate on microstructure and mechanical properties of ternary Zn-Mg-Al eutectic alloys, The 15th International Conference on Rapidly Quenched & Metastable Materials(RQ15), 2014-08
  • Influence of addition of Cu in microstructure and cycling performance of si-Ti-Ni anode for Li-Ion batteries, The 15th International Conference on Rapidly Quenched & Metastable Materials(RQ15), 2014-08
  • Effect of Al addition in Sn-Mg eutectic alloy on the microstructure and mechanical properties, The 15th International Conference on Rapidly Quenched & Metastable Materials(RQ15), 2014-08
  • Influence of additional element on mechanical properties of Ti-Sn eutectic composite, The 15th International Conference on Rapidly Quenched & Metastable Materials(RQ15), 2014-08
  • Effects of aluminum and zinc on mechanical properties of Mg-Li alloy, The 15th International Conference on Rapidly Quenched & Metastable Materials(RQ15), 2014-08
  • Investigation of microstructure and mechanical behavior of high entropy alloys, The 15th International Conference on Rapidly Quenched & Metastable Materials(RQ15), 2014-08
  • Interpretation of macroscopic mechanical properties in Fe-Nb-B composite alloys utilizing systematic nano-scale analysis, The 15th International Conference on Rapidly Quenched & Metastable Materials(RQ15), 2014-08
  • Influence of bimodal size of B2 Phase on mechanical properties of TiCu-based bulk metallic glass composites, The 15th International Conference on Rapidly Quenched & Metastable Materials(RQ15), 2014-08
  • Enhancement of mechanical properties by modulating microstructure in high entropy alloys, ISMANAM 2014(ISMANAM), 2014-07
  • Work-hardening and Plastic Deformation Mechanism of Ti-Cu-Ni-Zr-Sn Bulk Metallic Glass Composite, ISMANAM 2014(ISMANAM), 2014-07
  • Understanding of localized deformation and magnetization of Fe-Co-B-Si-Nb-Cr bulk metallic glasses, ISMANAM 2014(ISMANAM), 2014-07
  • Characterization and Deformation Behavior of Ti Hybrid Compacts with Solid-to-Porous Gradient Structure, ISNNM 2014(ISNNM), 2014-07
  • Strain-hardening Associated Martensitic Transformation in Ti-Cu-Ni-Zr-Sn bulk Metallic Glass Composite, The 10th International Conference on Bulk Metallic Glasses(The 10th International Conference on Bulk Metallic), 2014-06
  • Investigation of Ultrafine Eutectic Compositer with the Ternary Zn-Mg-Al alloys, The 10th International Conference on Bulk Metallic Glasses(The 10th International Conference on Bulk Metallic), 2014-06
  • Investigation of minor alloying on microstructure and mechanical properties of Sn-Mg alloys, The 10th International Conference on Bulk Metallic Glasses(The 10th International Conference on Bulk Metallic), 2014-06
  • Fabrication of nano-scale Fe2O3 and Fe3O4 on the surface of porous metallic glass compacts, The 10th International Conference on Bulk Metallic Glasses(Shanghai University ), 2014-06
  • Phase Transformation and Crystallization Behavior of TiCu-based Bulk Metallic Glass Composite, The 10th International Conference on Bulk Metallic Glasses(The 10th International Conference on Bulk Metallic), 2014-06
  • Parameters governing the plasticity of ductile phase incorporated Ti-based Bulk metallic glass matrix composites, The 10th International Conference on Bulk Metallic Glasses(The 10th International Conference on Bulk Metallic), 2014-06
  • Study on the microstructure and mechanical properties of (Ti33Zr33Hf33)-(Ni50Cu50) high entropy alloys developed by equiatomic substitution, The 10th International Conference on Bulk Metallic Glasses(The 10th International Conference on Bulk Metallic), 2014-06
  • Influence of aluminum and zinc addition on the mechanical properties of Mg-Li alloy, The 10th International Conference on Bulk Metallic Glasses(The 10th International Conference on Bulk Metallic), 2014-06
  • The mechanisms of mechanical properties and deformation behavior in Fe-Nb B dendrite-eutectic composites, The 10th International Conference on Bulk Metallic Glasses(The 10th International Conference on Bulk Metallic), 2014-06
  • 비정질 기지 복합재, 춘계 대한금속재료학회((사)대한금속재료학회), 2014-04
  • Effect of Al Addition on Microstructure and Mechanical Behavior of Sn-Mg-Al Alloys, 춘계 대한금속재료학회((사)대한금속재료학회), 2014-04
  • Development of the Ternary Zn-Mg-Al Yltrafine Eutectic Alloys, 춘계 대한금속재료학회((사)대한금속재료학회), 2014-04
  • 음극용 Si 소재의 미세조직 변화에 따른 리튬이온 전지의 특성변화 연구, 춘계 대한금속재료학회((사)대한금속재료학회), 2014-04
  • Effect of Nb on Microstructure & Mechanical properties of Ti-based Eutectic Alloy, 춘계 대한금속재료학회((사)대한금속재료학회), 2014-04
  • 유사원소치환법을 이용한 (Ti33Zr33Hf33)-(Ni50Cu50) 하이엔트로피 합금 개발 및 특성, 춘계 대한금속재료학회((사)대한금속재료학회), 2014-04
  • A study of the Correlation Between Macroscopic Mechanical Properties and Indentation Properties of Constituent for Composites, 춘계 대한금속재료학회((사)대한금속재료학회), 2014-04
  • Strain-hardening Associated Martensitic transformation in Ti-Cu-Ni-Zr-Sn Bulk Metallic Glass Composite, 춘계 대한금속재료학회((사)대한금속재료학회), 2014-04
  • 수열합성법을 이용한 비정질 다공체 표면에 나노산화물 형성, 2014 Spring Conference of Korean Powder Metallurgy Institute((사)한국분말야금학회), 2014-04
  • WC 표면 상에 TiN 코팅층 개발, 2014 Spring Conference of Korean Powder Metallurgy Institute((사)한국분말야금학회), 2014-04
  • Characterization of Multicomponent Alloys Developed by Equiatomic Substitution, TMS2014 143rd Annual Meeting & Exhibition(The Minerals, Metals and Materials Society), 2014-02
  • Localized Deformation behavior of Fe50Co(20-x)B20Si4Nb4Crx with x=0,1,3,5 at. Bulk Metallic Glasses under Nanoindentation, TMS2014 143rd Annual Meeting & Exhibition(The Minerals, Metals and Materials Society), 2014-02
  • Growth Metal Oxides on Surface Porous Al-Cu-Si Eutectic Alloy by Hydrothermal Method, The 15th international symposium on Eco-materials processing and design(ISEPD2014), 2014-01
  • Crystallization Behavior of Ti45Cu40Ni7.5Zr4Sn2.5Si1 Bulk Metallic Glass Composite, The 15th international symposium on Eco-materials processing and design(ISEPD2014), 2014-01
  • Development of High Strength on the Ternary Sn-Mg-Al Ultrafine Eutectic Composite, The 15th international symposium on Eco-materials processing and design(ISEPD2014), 2014-01
  • Combinatrial Influence of Bimodal Size of B2 TiCu Compounds on Plasticity of Ti-Cu-Ni-Zr-Sn-Si Bulk Metallic Glass Composites, The 15th international symposium on Eco-materials processing and design(ISEPD2014), 2014-01
  • Enhancement of Mechanical Properties by Modulating Microstructure in (Ti33Zr33Hf33)-(Ni50Cu50) High Entropy Alloys, The 15th international symposium on Eco-materials processing and design(ISEPD2014), 2014-01
  • Formation of a Strain-accommodated Lamellar Structure During Deformation of a Bimodal Ultrafine Eutectic Composite, The 15th international symposium on Eco-materials processing and design(ISEPD2014), 2014-01
  • Heterogeneous Eutectic Structure in Ti-Fe-Sn Alloys, The 15th international symposium on Eco-materials processing and design(ISEPD2014), 2014-01
  • Characteriazation of Free Volume Changes Associated with Nanoindentation Behavior and Magnetic Properties in Fe-based Bulk Metallic Glasses, The 15th international symposium on Eco-materials processing and design(ISEPD2014), 2014-01
  • Influence of Aluminum, Zinc and Boron Addition on the Mechanical Properties of Mg-Li alloy, The 15th international symposium on Eco-materials processing and design(ISEPD2014), 2014-01
  • Molecular Dynamics Study of Remelting Processing Based on Short to Medium Range Order in Cu50Zr50 Metallic Glass Alloy, 2013년도 대한금속 재료학회 추계학술대회(대한금속 재료학회), 2013-10
  • Optimization of mechanical Properties and Glass Forming Ability of Ti-Cu-Zr-Ni-Sn Glass Forming Alloys, 2013년도 대한금속 재료학회 추계학술대회(대한금속재료학회), 2013-10
  • Crystallization Behavior of Ti45Cu40Ni7.5Zr4Sn2.5Si1 Bul Metallic Glass Composite, 2013년도 대한금속 재료학회 추계학술대회(대한금속재료학회), 2013-10
  • 다공성 비정질 컴팩 개발, 2013년도 분말야금학획 추계학술강연 및 발표대회(한국분말야금학회), 2013-10
  • Formation of martensitic phase in Ti-based alloys, 2013년도 대한금속 재료학회 추계학술대회(대한금속 재료학회), 2013-10
  • Investigation of microstructure and Deformation Behavior in Thenary Al-Cu-Si Alloys by Atomic force Microscopy Analysis, 2013년도 대한금속 재료학회 추계학술대회(대한금속재료학회), 2013-10
  • Influence of Aluminum and Zinc Addition on the Mechanical Properties of Mg-Li Alloy, 2013년도 대한금속 재료학회 추계학술대회(대한금속재료학회), 2013-10
  • Understanding of local strain and magnetization of Fe-Co-B-Si-Nb-Cr BMGs, European Congress and Exhibition on Advanced materials and Processes(EUROMAT), 2013-09
  • Structural and chemical Heterogeneities of Ultrafine Eutectic Alloys, The 8th pacific rim international congress on advanced materials and processing(pricm8), 2013-08
  • Growth functional oxides on surface porous Al-Cu-Si eutectic alloy by hydrothermal method, ISMANAM 2013(ISMANAM), 2013-07
  • Improvement of mechanical properties by controlling free volume with mechanical working in CuZrTiNi buk metallic glasses, ISMANAM 2013(ISMANAM ), 2013-07
  • Influence of additional elements on the thermal stability and mechancal property in Zr-based bulk metallic glasses, ISMANAM 2013(ISMANAM), 2013-07
  • Fabrication and growth of oxide on high entropy alloys by hydrothermal synthesis, ISMANAM 2013(ISMANAM), 2013-07
  • Effect of additional elements on the microstructure and mechanical properties in Zr-based bulk metallic glasses, 2013년도 대한금속 재료학회 춘계학술대회(대한금속 재료학회), 2013-04
  • Enhancement of mechanical properties by modulating microstructure in (Ti33Zr33Hf33)-(Ni50Cu50) high entropy alloys, 2013년도 대한금속 재료학회 춘계학술대회(대한금속 재료학회), 2013-04
  • 수열합성을 이용한 기능성 산화물이 도포된 비정질 다공체 개발, 2013년 분말야금학회 춘계학술강연 및 발표대회(한국분말야금학회), 2013-04
  • Cu계 비정질합금의 기계적 후처리 가공에 따른 열적특성과 기계적특성의 변화연구, 2013년도 대한금속 재료학회 춘계학술대회(대한금속 재료학회), 2013-04
  • 수열합성(Hydrothermal)공정을 통한 Al88Cu6Si6공정합금의 표면특성부여, 2013년도 대한금속 재료학회 춘계학술대회(대한금속 재료학회), 2013-04
  • Formation of icosahedral quasicrystal and C14-laves phases in Ti41.5Zr41.5Ni17 alloy by controlling cooling rate, 2013년도 대한금속 재료학회 춘계학술대회(대한금속 재료학회), 2013-04
  • Study on crystallization behavior of TiCu-based bulk metallic glass, 2013년도 대한금속 재료학회 춘계학술대회(대한금속 재료학회), 2013-04
  • Investigation of microstructure and mechanical behavior of Fe-Nb-B dendrite-eutectic composite alloys, 2013년도 대한금속 재료학회 춘계학술대회(대한금속 재료학회), 2013-04
  • Effect of bimodal-size of B2 phase on mechanical properties of TiCu-based bulk metallic glass composites, 2013년도 대한금속 재료학회 춘계학술대회(대한금속재료학회), 2013-04
  • A molecular dynamics studies of Kauzmann temperature based on short range order in Zr50Cu50 amorphous alloy, 2013년도 대한금속 재료학회 춘계학술대회(대한금속 재료학회), 2013-04
  • Combinatorial Influence of Biomodal Size of B2 TiCu Compounds on Plasticity of Ti-Cu-Ni-Zr-Sn-Si Bulk Metallic Glass Composites, TMS2013 142nd Annual Meeting & Exhibition(The Minerals, Metals and Materials Society), 2013-03
  • Development of Fe-base multicomponent bulk metallic glasses, 한국재료조직학회, 2013-02
  • Influence of minor additional oxide compounds on Mechanical behavior of Mg-based Bulk Metallic Glasses, The 9th International Conference on Bulk metallic glasses, 2012-12
  • Influence of phase selection on deformation behavior of Ti-Fe-Sn nanostructure dendrite composites, The 9th International Conference on Bulk metallic glasses, 2012-12
  • Effect of heat mixing enthalpy on the thermal and mechanical properties in Zr-based bulk metallic glasses, The 9th International Conference on Bulk metallic glasses, 2012-12
  • A Molecular dynamics study of cooling rate effects and kauzmann temperature based on short range order in Zr50Cu50 amorphous alloy, The 9th International Conference on Bulk metallic glasses, 2012-12
  • Nanoindentation behavior of Fe52Co20-xB20Si4Nb4Crx bulk metallic glasses with x = 0, 1, 3, 5 at. %, The 9th International Conference on Bulk metallic glasses, 2012-12
  • Development of Al88Ni1Y10M1 (M=B, Ce, Co, Nb, Sm) amorphous alloys containing nano-sized fcc-Al particles, The 9th International Conference on Bulk metallic glasses, 2012-12
  • Development of Al88Ni1Y10M1 (M=B, Ce, Co, Nb, Sm) amorphous alloys containing nano-sized fcc-Al particles, 2012 한국재료학회(한국재료학회), 2012-11
  • Effect of crystalline phases on the microstructure and mechanical properties in Zr-based bulk metallic glasses, 2012 한국재료학회(한국재료학회), 2012-11
  • Optimization of mechanical properties in (Ti33Zr33Hf33)-(Ni50Cu50) high entropy alloys developed by equiatomic substitution, 2012 한국재료학회(한국재료학회), 2012-11
  • Investigation of microstructure and mechanical behavior in Fe-Nb-B dendrite-eutectic composite alloys, 2012한국재료학회, 2012-11
  • 수열합성법(Hydrothermal process)을 이용한 Al-based 표면다공체에서의 기능성 산화물 성장, 2012 한국재료학회(한국재료학회), 2012-11
  • Influence of micro-alloying on microstructure evolution and mechanical properties of Ti, ICMMP 2012(The university of Queensland etc.), 2012-07
  • Effect of cooling rate on amorphous structures and thermal properties of Zr50Cu50 metallic glasses, 2012 한국재료학회(한국재료학회), 2012-05
  • Improvement of the mechnical properties of Ti-Fe-Sn alloys by dendrite phase selection, 2012 한국재료학회(한국재료학회), 2012-05
  • Ni-Ti-Zr-Si-Sn 벌크비정질합금에서 Nb첨가가 열적성질과 기계적성질에 미치는 영향, 2012 한국재료학회(한국재료학회), 2012-05
  • Development of High Strength Ultrafine Eutectic Fe-B-Nb Composites with Enhanced Plasticity, 2012년도 대한금속 재료학회 춘계 학술대회(대한금속 재료학회), 2012-04
  • Microstructure and Mechanical Properties of (Ti33Zr33Hf33)-(Ni50Cu50) High Entropy Alloys Developed by Equiatomic Substitution. , 2012년도 대한금속 재료학회 춘계 학술대회(대한금속 재료학회), 2012-04
  • 화학적 침출법을 통한 Al-,Ti-based 극미세공정합금의 표면다공체 제조, 2012년도 대한금속 재료학회 춘계 학술대회(대한금속재료학회), 2012-04
  • Effect of Additional Elements on Microstructure and Mechanical Properties of Al-Ni-Y Amorphous Alloys., 2012년도 대한금속 재료학회 춘계 학술대회(대한금속 재료학회), 2012-04
  • Development of Porous Metallic Glass Compacts, TMS2012 141st Annual Meeting & Exhibition(The Minerals, Metals and Materials Society), 2012-03
  • Recent Development of Bulk Metallic Glasses and Ultrafine Eutectic Alloys, 2011 2nd China - Korea Cooperative Symposium on Advanced Materials, 2011-11
  • 전기방전소결공정에서 방전 횟수가 다공성 Zr62Al8Ni13Cu17 성형체의 특성에 미치는 영향, 2011년도 대한금속재료학회 추계 학술대회, 2011-10
  • Effect of Phase Selection on Microstructural Evolution in Al-Si-Ni Alloys, 2011년도 대한금속재료학회 추계 학술대회, 2011-10
  • Formation mechanism of neck during Electro-Discharge Sintering, 2011년도 대한금속재료학회 추계 학술대회 초록집, 2011-10
  • Cu-Zr-Ti 벌크 비정질 합금에서 양의 혼합열 차이를 가지는 첨가원소에 의한 열적 안정성 및 기계적 특성 고찰, 2011년도 대한금속재료학회 추계 학술대회 초록집, 2011-10
  • Microscopic Deformation Mechanism of Ti-Cu-Ni-Zr-Sn-Si- Bulk Metallic Glass Composite, 2011년도 대한금속재료학회 추계 학술대회 초록집, 2011-10
  • Influence of Minor Elements on Microstructure and Mechanical Properties of Ti-Fe-Bi Ultrafine Eutectic Alloys, 2011년도 대한금속재료학회 추계 학술대회, 2011-10
  • The Effect of Nb Addition on Microstructure and Mechanical Properties of Zr-Cu-Ni-Al bulk Metallic Glass, 2011년도 대한금속재료학회 추계 학술대회, 2011-10
  • Study of Correlation Between Mechanical Propertide and Magnetic Properties in Fe52Co20-xB20Si4Nb4Crx Bulk Metallic Glasses, 2011년도 대한금속재료학회 추계 학술대회, 2011-10
  • Formation and Mechanical Properties Of Zr-Ni-Al Bulk Metalllic Glasses Composites, 2011년도 대한금속재료학회 추계 학술대회, 2011-10
  • Mg58.5Cu30.5Y11 벌크 비정질 형성 합금계에서의 CaO를 통한 나노 복합구조 제어 및 그에 따른 특성 변화, 2011년도 대한금속재료학회 추계 학술대회, 2011-10
  • Sintering Mechanism of Electro-Discharge Sintering, IEEE NMDC-2011, 2011-10
  • Ti-Sn-Mo Heterogeneous Duplex Alloys with High Strength and Large Plastic Deformation, 2011년도 대한금속재료학회 추계 학술대회 초록집, 2011-10
  • Effect of Ni on Microstructure and mechanical properties of Al-based bimodal eutectic composites, 2011년도 대한금속재료학회 추계 학술대회 초록집, 2011-10
  • Surface treatment of porous metallic glassy compacts fabricated by EDS Using hydrothermal method, 7th International Conference on Porous Metals and Metallic Foams(MetFoam2011)(MetFoam2011), 2011-09
  • Characterization of Multicomponent Alloys Developed by Equiatomic Substitution, 12th IUMRS International Conference in Asia (IUMRS-ICA 2011)(IUMRS-ICA 2011), 2011-09
  • Effect of powder morphology on fabrication of porous Ti compacts fabricated by multiple discharging during Electro-dischargngig-sintering, 7th International Conference on Porous Metals and Metallic Foams (MetFoam) 2011(MetFoam 2011), 2011-09
  • Effect of multiple discharging on porosity and phase transformation of porous metallic glass compact using Electro-Discharge Sintering, The 14th International Conference on Rapidly Quenched and Metastable Materials, 2011-08
  • Effect of Ni on microstructure and mechanical properties of Al-based ultrafine eutctic composites, The 14th International Conference on Rapidly Quenched and Metastable Materials, 2011-08
  • The Influence of Mo addition on microstructure and mechanical properties in Ti82Sn18 Ultrafine eutectic composites, The 14th International Conference on Rapidly Quenched and Metastable Materials, 2011-08
  • Effect of substitution of Co for Cu on the Thermal stability and glass forming ability of Cu55Zr25Ti15Ni5 bulk metallic glass alloy, The 14th International Conference on Rapidly Quenched and Metastable Materials, 2011-08
  • Influence of Minor Elements on Microstructure and Mechanical Properties of Ti-Fe-Bi and Ti-Fe-Y Ultrafine Eutectic Alloys, The 14th International Conference on Rapidly Quenched and Metastable Materials, 2011-08
  • Recent development of high strength ultrafine eutectic alloys with enhanced plasticity, The 14th International Conference on Rapidly Quenched and Metastable Materials, 2011-08
  • Investigation on Effect of the number of Discharging on Microstructure of Porous Ti-compacts, International Conference on Sintering 2011, 2011-08
  • Effect of size of compacts on sintering during Electro-Discharge Sintering, International Conference on Sintering 2011, 2011-08
  • Fabrication of Porous Metallic Glass Compacts Using Electro-Discharge Sintering, Germany-Korea Workshop on Bulk Metallic Glasses and Nanostructured Materials, 2011-08
  • Development of High Strength Al-Ni-Si Eutectic Alloys with Large Plasticity, The 14th International Conference on Rapidly Quenched and Metastable Materials, 2011-08
  • Influence of Thermal Properties of Metallic Glassy Powder on Fabrication of Porous Metallic Glassy Compacts using Electro-Discharge Sintering, The 14th International Conference on Rapidly Quenched and Metastable Materials, 2011-08
  • Investigation on Influence of heat flow on formation and characteristics of bulk metallic glasses during solidification, The 14th International Conference on Rapidly Quenched and Metastable Materials, 2011-08
  • Fracture and deformation behavior of (TiCu)-based bulk metallic glass composites, The 14th International Conference on Rapidly Quenched and Metastable Materials, 2011-08
  • Sintering mechanism of Electro-Discharge Sintering, ISMANAM 2011, 2011-06
  • The Influence of a Heat Treatment on the Microstructure and Mechanical Properties of Ag-Cu Eutectic alloy, ISMANAM 2011, 2011-06
  • Influence of crystalline phase on viscosity and mechanical properties of (TiCu)-based bulk metallic glass composites, ISMANAM 2011, 2011-06
  • Effect of Microstructural change on mechanical properties of Al-Cu-Si alloys, ISMANAM 2011, 2011-06
  • effect of additonal elements with positive enthalpy of mixing on thermal and mechanical properties of Cu-Zr-Ti bulk metallic glass alloy, ISMANAM 2011, 2011-06
  • High strength Zr-Ni-cu eutectic composites with enhanced plasticity, ISMANAM 2011, 2011-06
  • Influence of Immiscible Elements on Microstructure and Mechanical Properties of Ti-Fe-Bi Ultrafine Eutectic Alloys, ISMANAM 2011, 2011-06
  • Development of High Strength Ti-based Bulk Metallic Glasses and Ultrafine Eutectic Alloys, ISMANAM 2011, 2011-06
  • Investigation on Deformation Behavior of Al-Cu-Si High Ductility Composites Using Atomic Force Microscopy, The 6th Asian International Workshop on Quasicrystals, 2011-05
  • Development of (TiCu)-based bulk metallic glass composites with hard crystalline phase, The 6th Asian Intermational Workshop on Quasicrystals, 2011-05
  • Effect of Mo Addition on Microstructure and Mechanical Properties In Ti82Sn18 Ultrafine Eutectic Composites, The 8th International Conference on Bulk Metallic Glasses, 2011-05
  • Effect of Pd and Ni Addition on Thermal and Mechanical Properties In Cu60Zr25Ti15 Bulk Metallic Glass, The 8th International conference on Bulk Metallic Glasses, 2011-05
  • Investigation on Deformation Behavior of Al-Cu-Si Bimodal Eutectic Composites using Atomic Force Microscopy, The 8th International Conference on Bulk Metallic Glasses, 2011-05
  • Microstructural Modification of Ag-Cu-Mn Ultrafine Eutectic Alloys, The 8th International Conference on Bulk Metallic Glasses, 2011-05
  • Development of porous metallic glass compacts using Electro-Discharge Sintering, The 8th International Conference on Bulk Metallic Glasses, 2011-05
  • Development of (TiCu)-based Bulk Metallic Glass Composites with spherical In-situ Phase, The 8th International Conference on Bulk Metallic Glasses, 2011-05
  • Effect of Fe and Mi addition on the thermal and mechanical properties in Cu60Zr25Ti15 alloys, The 6th Asian International Workshop on Quasicrystals, 2011-05
  • Effect of solubility on the microstructure and properties of Ag-Cu nano-eutectic composites, The 6th Asian International Workshop on Quasicrystals, 2011-05
  • Formation mechanism of neck during Electro-Discharge Sintering, The 6rh Asian International Workshop on Quasicrystals, 2011-05
  • Effect of heat-Treatment on Microstructure and Mechanical Properties of Ag-Cu Eutectic Alloy, 2011년도 대한금속재료학회 춘계학술대회 초록집, 2011-04
  • Cu-Zr-Ti 벌크 비정질 합금에서 혼합열 차이를 가지는 첨가원소에 의한 열적 안정성 및 기계적 특성 고찰, 2011년도 대한금속재료학회 춘계 학술대회 초록집, 2011-04
  • Development of High Strength Zr-based Eutectic Alloys with Large Plasticity, 2011년도 대한금속재료학회 춘계 학술대회, 2011-04
  • Effect of Cr Addition on Magnetic and Mechanical Properties of Fe52Co20B20Si4Nd4 Bulk Metallic Glass, 2011년도 대한금속재료학회 춘계 학술대회, 2011-04
  • Development of (TiCu)-based Bulk Metallic Glass Composites, 2011년도 대한금속재료학회 춘계 학술대회 초록집, 2011-04
  • Improvement of Mechnical Properties by Bi,Mg Additions into Binary Ti-Fe Eutectic Alloy, 2011년도 대한금속재료학회 춘계 학술대회 초록집, 2011-04
  • Deformation of (TiCu)-based amorphous metal and composites, 한국물리학회, 2011-04
  • Development of High Strength Al-Ni-Si Eutectic Alloys with Large Plasticity, 2011년도 대한금속재료학회 춘계 학술대회, 2011-04
  • Antiferromagnetically Exchange-coupled Two Phase Magnets based on Amorphous metallic matrix, 2011년도 대한금속재료학회 춘계 학술대회, 2011-04
  • Study of Deformation of Ternary Al-Cu-Si high Ductility Alloys by AFM Analysis, 2011년도 대한금속재료학회 춘계 학술대회 초록집, 2011-04
  • Investigation on Influence of Heat Flow on Formation and Chracteristic of Bulk Metallic Glass During Solidification, 2011년도 대한금속재료학회 춘계 학술대회 초록집, 2011-04
  • Effect of Porosity of Compacts Fabricated by Electro-Discharge Sintering on Viscous Flow, 2011년도 대한금속재료학회 춘계 학술대회 초록집, 2011-04
  • 전기방전소결 공정에서의 방전횟수가 다공성 Ti 성형체의 특성에 미치는 영향, 2011년도 대한금속재료학회 춘계 학술대회 초록집, 2011-04
  • Zr-Cu-Ni-Al 벌크 비정질 합금에서 Zr을 Nb로 치환함에 의한 연신 향상, 2011년도 대한금속재료학회 춘계 학술대회 초록집, 2011-04
  • Fracture and deformation behavior of (TiCu)-based bulk metallic glass composites, 한국재료조직학회, 2011-02
  • Factors to Control Strength and Plasticity of Bulk Metallic Glasses and Ultrafine Eutectic Alloys, 2011 1st China-Korea Cooperative Symposium on Advanced Materials, 2011-02
  • 전기방전 소결법을 이용한 비정질 다공체 제조 및 특성분석, 2010년도 대한금속재료학회 추계학술대회 초록집, 2010-11
  • 합금원소 첨가에 따른 Ti-Fe 공정합금의 미세조직과 기계적성질변화, 2010년도 대한금속재료학회 추계학술대회 초록집, 2010-11
  • Factors to Control Strength and Plasticity of Advanced Alloys, 제24회 첨단구조재료 심포지엄 (대한금속 재료학회)(대한금속 재료학회), 2010-11
  • Effect of Phase Selection on Microstructural Evolution in Hetero-Duplex Al-Cu-Si Alloys, 2010년도 대한금속재료학회 추계학술대회 초록집, 2010-11
  • 전기방전소결법을 이용한 비정질 다공체 개발, 한국분말야금학회 추계학술대회, 2010-11
  • Development of High Strength and Ductile Alloys Based on Modulation of Ultrafine Euectic Structure, 대한금속재료학회 첨단구조재료 심포지움, 2010-11
  • Fracture and Deformation Behavior of (TiCu)-based Bulk Metallic Glass Composite, 2010년도 대한금속재료학회 추계학술대회 초록집, 2010-11
  • 첨가원소에 따른 Ag-Cu 극미세 공정조직 합금의 미세구조 및 기계적 특성의 변화, 2010년도 대한금속재료학회 추계학술대회 초록집, 2010-11
  • Nb 함량에 따른 TWIP 강의 미세 조직 및 기계적 물성의 변화, 2010년도 대한금속재료학회 추계학술대회 초록집, 2010-11
  • Cu-Zr-Ti 벌크 비정질 합금에서 양의 혼합열을 가지는 첨가원소에 의한 상온 소성 향상, 2010년도 대한금속재료학회 추계학술대회 초록집, 2010-11
  • Novel multicomponent alloys developed by equiatomic substitution, IUMRS-ICA 2010 IUMRS 11th International Conference in Asia, 2010-09
  • Development of High Strength and Ductile Alloys Based on Modulation of Ultrafine Euectic Structure, the 6th KU-KITECH Symposium on Bulk Metallic Glasses and Advan Materials, 2010-09
  • Development of Porous Amorphous Compacts Using Electro-Discharge-Sintering, CellMat2010, 2010-09
  • Development of High Strength and Ductile Alloys Based on Modulation of Ultrafine Euectic Structure, 7th Pacific Rim International Conference on Advanced Materials and Processing(PRICM 7)(PRICM 7), 2010-08
  • Hetero-Ultrafine Structure in Ti-Fe-Sn Alloys, ISMANAM 2010, 2010-07
  • Formation of Porous Amorphous Compacts y Electro-Discharge-Sinterig, ISMANAM 2010, 2010-07
  • Fe 첨가에 따른 Cu-Ag 극미세 공정조직 합금의 미세구조 및 기계적 특성의 변화, 2010년도 대한금속재료학회 추계학술대회 초록집, 2010-04
  • 전기방전 소결법을 이용한 텅스텐 다공체 제조 및 특성 분석, 2010년도 대한금속재료학회 추계학술대회 초록집, 2010-04
  • 전기방전소결법을 이용한 다공정 텅스텐 개발, 2010 춘계학술강연 및 발표대회 강연 및 발표논문 초록집(한국분말야금학회)(한국분말야금학회), 2010-04
  • 전기방전 소결 장비를 이용한 Nd-Fe-B계 소결 자석에 대한 연구, 한국분말야금학회 춘계학술대회, 2010-04
  • 첨가원소 혼합열 차이가 Cu계 비정질 합금의 기계적 특성에 미치는 영향, 2010년도 대한금속재료학회 추계학술대회 초록집, 2010-04
  • 냉각속도에 따른 극미세 공정조직 양극화 Al81Cu13Si6 합금의 미세조직 변화, 2010년도 대한금속재료학회 추계학술대회 초록집, 2010-04
  • 과냉각 액상영역 확장형 Ni-based 비정질 합금 개발, 2010년도 대한금속재료학회 추계학술대회 초록집, 2010-04
  • Development of (TiCu)-based Bulk Metallic Glass Composite with Wide Super Cooled Liquid Region, 2010년도 대한금속재료학회 추계학술대회 초록집, 2010-04
  • 분말크기와 형상이 전기방전소결을 이용한 다공성 형성에 미치는 영향, 2010 춘계학술강연 및 발표대회 강연 및 발표논문 초록집(한국분말야금학회)(한국분말야금학회), 2010-04
  • Microstructure and mechanical property of widmanst?tten dendrite-reinforced ultrafine eutectic composites in Ti-Sn alloys, BMG 7, 2009-11
  • Influence of microstructural change on mechanical properties in TiCu- and Fe-based bulk metallic glasses, BMG 7, 2009-11
  • Characterization of bimodal ultrafine eutectic alloys, BMG 7, 2009-11
  • Correlation between microstructure and mechanical properties of Mg-based ultra-fine eutectic composites, BMG 7, 2009-11
  • 다공성 비정질 소결체 개발, 추계한국분말야금학회, 2009-11
  • 불균일성 제어를 이용한 담체용 비정질 합금의 변형, 추계한국분말야금학회, 2009-11
  • Microstructue evolution and mechanical properties of high strength ultrafine eutectic Fe-based composites, 추계대한금속재료공학회, 2009-10
  • Microstructure and mechanical properties of Ti-Fe-Sn ultra-fine eutectic composites, 추계대한금속재료학회, 2009-10
  • Development of Bimodal Ultrafine Composites in Ti- and Mg-based Alloys, Euromat 2009, 2009-09
  • Mechanical properties of ternary Ti-Fe-Sn bimodal eutectic composite without primary dendrites, Euromat 2009, 2009-09
  • Development of high strength eutectic Fe-Ni-B alloys with enhanced plasticity, Euromat 2009, 2009-09
  • Development of porous Ti-Zr-Ni compacts using electro-discharge-sintering, Metfoam 2009, 2009-09
  • Development of High Strength and Ductile Alloys Based on Modulation of Ultrafine Eutectic Structure, ISMANAM 2009, 2009-07
  • Structural evolution of icosahedral phase in porous Ti-Zr-Ni compacts during electro-discharge sintering, ISMANAM 2009, 2009-07
  • Role of beta stabilizer V and Nb on the Ti-Fe ultrafine eutectic alloy, ISMANAM 2009, 2009-07
  • Development of high strength nanostructured eutectic Fe alloys with enhanced plasticity, ISMANAM 2009, 2009-07
  • Formation of porous Ti and Ti-Zr-Ni compacts by electro-discharge sintering, ISFM 2009, 2009-06
  • Fe계 하이브리드 복합소재 개발 및 기계적 특성 연구, 춘계한국재료학회, 2009-05
  • 극미세 공정조직 양극화 Ti-, Mg-합금의 개발 및 변형거동 연구, 춘계한국재료학회, 2009-05
  • Effect of microstructural change of ternary Ti-Fe-Sn bimodal eutectic composites without primary dendrites on mechanical properties, 춘계 대한금속재료학회, 2009-04
  • Development of high strength eutectic Fe-based alloys with enhanced plasticity, 춘계대한금속재료공학회, 2009-04
  • Effect of Reinforcement on the Nanocrystallization in Bulk metallic glass matrix composites, APMC_9, 2008-11
  • 전기 방전 소결을 통한 준결정 Ti-Ni-Zr 다공성 재료 개발, 한국분말야금학회, 2008-11
  • SPS공정으로 제조한 Ge-Sb-Te target과 박막의 특성, 한국분말야금학회, 2008-11
  • SPS(Spark Plasma Sintering)공정으로 제조된 Ge-Sb-Te 타겟의 밀도가 상변체 박막의 특성에 미치는 영향, 대한금속재료학회, 2008-10
  • 합금원소 첨가에 따른 Ti-Fe 극미세 공정합금의 미세조직과 기계적성질 변화, 대한금속재료학회, 2008-10
  • Nb 첨가에 따른 Ti-Ni 공정 조직 합금의 미세조직 및 기계적 특성 변화연구, 대한금속재료학회, 2008-10
  • Mechanical properties of Mg-Zn-Al ultrafine eutectic composites, 대한금속재료학회, 2008-10
  • Length-scale and chemical heterogeneities in a Ti64.2Fe26.8Sn9 alloy, 대한금속재료학회, 2008-10
  • Deformation behavior of (TiCu)-based bulk metallic glasses, ICAMP_5, 2008-09
  • Development of high strength ultrafine eutectic alloys with enhanced plasticity, GRL workshop, 2008-09
  • Sintering and characterization of Ge-Sb-Te target by Spark Plasma Sintering, ICAMP_5, 2008-09
  • High strength Mg-Cu-Zn nanostructured-dendrite composites with enhanced plasticity, ICAMP_5, 2008-09
  • Evaluation of the rheology property epoxy resin in FRP composite for the optimizing HDF process, ICAMP-5, 2008-09
  • Effect of the formation phase on plastcity in Ti-Ni ultrafine eutectic alloys, ICAMP-5, 2008-09
  • Development of ternary Mg-based nanostructure-dendrite composites, RQ13, 2008-08
  • Characterization of Ge-Sb-Te target by Spark Plasma Sintering, RQ13, 2008-08
  • INFLUENCES OF Sn ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Ti-Fe-Sn ALLOYS, RQ13, 2008-08
  • Development of Al-based nanostructure-dendrite composites, RQ13, 2008-08
  • Development of high strength Mg-based ultrafine eutectic composites with enhanced plasticity, BMG6, 2008-05
  • 첨가원소 Sn의 증가에 따른 Ti-Fe-Sn 극미세 합금의 미세조직 및 기계적 성질 변화, 한국재료학회, 2008-05
  • 극미세 공정 조직과 수지상정 조직을 이용한 고강도 고연성의 Mg-Cu-Zn 합금의 개발, 한국재료학회, 2008-05
  • Sn 첨가에 따른 Ti-Ni 나노공정합금의 미세조직과 기계적 특성 변형연구, 한국재료학회, 2008-05
  • Role of heterogeneities on plasticity of bulk metallic glasses, BMG6, 2008-05
  • 냉각속도가 Al-계 합금의 미세조직 형성에 미치는 영향, 한국재료학회, 2008-05
  • 사원계 Al-Fe-Cr-Ti와 Al-ms-Cr-Zr 합금의 미세조직과 기계적 특성, 대한금속재료학회, 2008-04
  • CFRP복합재료의 Epoxy Resin의 레올로지 특성 평가, 대한금속재료학회, 2008-04
  • Sn, Al, Ag의 첨가에 따른 Ti-Fe 공정 합금의 미세조직과 기계적 성질의 변화, 대한금속재료학회, 2008-04
  • Development of Ternary Mg-based Alloy with high plasticity and strength, 대한금속재료학회, 2008-04
  • Spark Plasma Sintering 을 이용한 Ge-Sb-Te Target의 소결 및 특성, 대한금속재료학회, 2008-04
  • Sn 첨가에 따른 Ti-Ni 합금의 미세조직과 기계적 특성 변형 연구, 대한금속재료학회, 2008-04
  • 상/크기제어기술을 이용한 신소재합금개발, 한국분말야금학회, 2008-04
  • Ge-Sb-Te 분말의 소결 특성, 한국분말야금학회, 2008-04
  • structural evolution of Zr-Nb-Ni-Cu-Al nanostructure-dendrite composites, PRICM 6, 2007-11
  • Formation of icosahedral phase in Al-Fe-Cr-Ti alloy, Pricm6, 2007-11
  • Microstructure and mechanical properties of high strength Ti-Fe-Sn alloys, Pricm6, 2007-11
  • pulsed electric current sintering공정을 이용한 Ge-Sb-Te 타겟의 소결 및 특성, 2007 대한금속재료학회 추계학술대회, 2007-11
  • Zr과 연강의 첨가가 Al-Fe-Cr-Ti의 준결정상 형성에 미치는 영향에 대한 연구, 2007 대한금속재료학회 추계학술대회, 2007-11
  • 냉각속도에 따른 Zr-Nb-Ni-Cu-Al 나노구조복합재료의 형성상, 미세조직과 기계적 특성 변화, 2007 대한금속재료학회 추계 학술대회, 2007-11
  • 3원계 Ti-Fe-Sn합금에서 Sn첨가량의 증가에 따른 미세조직 변화 및 기계적 특성 분석, 2007 대한금속재료학회 추계학술대회, 2007-11
  • Shear bands in a Cu-Zr-Al bulk metallic glass, JSPS-KOSEF Asian Core Program The third Japan-Korea Workshop on Metallic Glasses, 2007-09
  • Glass forming ability and crystallization behavior of Fe-based bulk metallic glasses, International symposium on metastable and nano-materials, 2007-08
  • Development of ultrafine eutectic structure in Ti-Fe-Sn alloys, Asian Workshop on Metallic Glass and Nanostructured Materials, 2007-05
  • 연성이 우수한 (TiCu)-based 벌크비정질 합금의 개발 및 기계적 특성 평가, 대한금속재료학회 춘계학술대회, 2007-04
  • 삼원계 Ti-Fe-Sn 나노구조합금의 미세조직과 특성평가, 2007 대한금속재료학회 춘계학술대회, 2007-04
  • 극미세 공정조직을 갖는 Ti-Fe-Sn 나노구조재료의 개발, 2007 대한금속재료학회 춘계학술대회, 2007-04
  • Single roll casting법에 제조된 Zr계 비정질 박판의 특성, 2007 대한금속재료학회 춘계학술대회, 2007-04
  • Deformation behavior of high strength/ductile Ti-based nanostructure-dendrite composites, CORE UNIVERSITY PROGRAM-BULK METALLIC GLASSES(과학재단)(과학재단), 2006-10
  • Development of ductile (Ti,Cu)-based bulk metallic glasses, Bulk Metallic Glasses IV, 2006-10
  • Sn effect on microstructre of high strength Ti-Fe-Sn alloys, 2006추계학술대회(대한금속재료학회)(대한금속재료학회), 2006-10
  • Microscopic defomation mechanism of high strength/ductile Ti66.1Cu8Ni4.8Sn7.2Nb13.9 nanostructure-dendrite composite, 2006 추계학술대회(대한금속재료학회)(대한금속재료학회), 2006-10
  • Sn effects on microstructure of ductile (Ti,Cu)-based bulk metallic glasses, 2006종합학술대회(한국군사과학기술학회)(한국군사과학기술학회), 2006-08
  • Mechanical properties of Cu-Zr-Al and Ti-Cu-Zr-Ni-Sn BMGs, 2006 춘계학술대회(대한금속재료학회)(대한금속재료학회), 2006-04